Please use your web browser search engine to find the paper you are looking for (CTRL+F usually). Make sure you click somewhere within the table first.

A B C D E F G H I J K L M N O P R S T U V W X Y Z

Author ID. Title
Maher Abou Al-Sood
  1. Simple Model for Turbulence Effects on the Vaporization of Liquid Single Droplets in Forced Convective Conditions
    Abstract / Full Paper
Hirokazu Adachi
  1. Spatial Droplets Size Distribution in a Diesel Spray Taken by Photography with Super High Resolution
    Abstract / Full Paper
Wahidullah Ahmadi
  1. Effect of Fuel-Evaporation Zone Length on Spray Combustion in a Gas Turbine Combustion Chamber
    Abstract / Full Paper
Vincent Alaterre
  1. Characterization of fuel oil atomizers in industrial operation
    Abstract / Full Paper
Samah Alghoul
  1. Experimental investigation of a Single Droplet Interaction with Shear Driven Film
    Abstract / Full Paper
Luigi Allocca
  1. Bio- and Mineral-Fuel Spray Evolution in Non-Evaporating and Evaporating Conditions by Image Processing Techniques
    Abstract / Full Paper
Hugo Almeida
  1. Effect of the Liquid Injection Angle on the Atomization of Liquid Jets in Subsonic Crossflows
    Abstract / Full Paper
Alidad Amirfazli
  1. Statistical analysis of water drop impact on surfaces with variable wettability
    Abstract / Full Paper
T.N.C. Anand
  1. Effervescent Spray Characterization of Jatropha Pure Plant Oil
    Abstract / Full Paper
  2. High Pressure Spray Characterization of Vegetable Oils
    Abstract / Full Paper
Mats Andersson
  1. Characterization of Wall Film Formation from Impinging Diesel Fuel Sprays using LIF
    Abstract / Full Paper
Sven Andersson
  1. Influence of cavitation on atomisation at low pressures using up-scaled and transparent nozzles
    Abstract / Full Paper
Fabient Anselmet
  1. Pressure-Swirl Atomization Modelling using the Eulerian Approach
    Abstract / Full Paper
Carlo Antonini
  1. Statistical analysis of water drop impact on surfaces with variable wettability
    Abstract / Full Paper
Mohammad Arafin
  1. Numerical investigation of fuel property effect on cavitating flow in generic fuel injection nozzle geometries
    Abstract / Full Paper
Bruno Argueyrolles
  1. Coupling 1D System AMESim and 3D CFD EOLE models for Diesel Injection Simulation
    Abstract / Full Paper
Mehdi Ashjaee
  1. Effect of Flow Conditions on Spray Cone Angle of a Two-Fluid Atomizer
    Abstract / Full Paper
Charles Audiffren
  1. Coupling 1D System AMESim and 3D CFD EOLE models for Diesel Injection Simulation
    Abstract / Full Paper
William D. Bachalo
  1. Spray Characterization: A Critical Review
    Abstract
Doo-Sung Baik
  1. A Numerical Analysis for the Spray Characteristics of Liquefied n-butane Fuel
    Abstract
Giovanni Bailardi
  1. Several aspects of the atomization behavior of various Newtonian fluids with a like-on-like impinging jet injector
    Abstract / Full Paper
Wamadeva Balachandran
  1. Experimental study on charging behavior of bio-fuels sprays generated by an annular electrostatic atomizer
    Abstract
Sayed Abdolhossein Banitabaei
  1. Effect of Flow Conditions on Spray Cone Angle of a Two-Fluid Atomizer
    Abstract / Full Paper
Felix Barreras
  1. Mode Transitions in an Oscillating Liquid Sheet
    Abstract / Full Paper
  2. Visualization of the Flow in a New Injection Burner
    Abstract
Frank-Oliver Bartz
  1. An extension of dynamic droplet deformation models to secondary atomization
    Abstract / Full Paper
Hans-Jörg Bauer
  1. Heat and Mass Transfer accompanied by Crystallisation of single Particles containing Urea-water-solution
    Abstract / Full Paper
  2. Pre-filming primary atomization: Experiments and modeling
    Abstract / Full Paper
  3. An extension of dynamic droplet deformation models to secondary atomization
    Abstract / Full Paper
Ali Bayat
  1. Efficiency of different spray application methods in second crop maize
    Abstract / Full Paper
Rudy Bazile
  1. Experimental and numerical investigation of evaporating mono-component droplets in a turbulent channel flow
    Abstract / Full Paper
Steven Begg
  1. High-speed video observation and phase Doppler anemometry measurements of oil break-up in a model engine crankcase
    Abstract / Full Paper
Valérie Bégin
  1. Velocity measurements of bubbles in liquid nitrogen
    Abstract / Full Paper
Mauro Begliatti
  1. Characterization of Wall Film Formation from Impinging Diesel Fuel Sprays using LIF
    Abstract / Full Paper
Thomas Behrendt
  1. Measurement of Initial Conditions of a Kerosene Spray from a Generic Aeroengine Injector at Elevated Pressure
    Abstract / Full Paper
Radu Beleca
  1. Experimental study on charging behavior of bio-fuels sprays generated by an annular electrostatic atomizer
    Abstract
Abdelhak Belhadef
  1. Pressure-Swirl Atomization Modelling using the Eulerian Approach
    Abstract / Full Paper
Alain Berlemont
  1. Numerical Simulations of the Interactions between a Vortex and a Liquid Gas Interface
    Abstract / Full Paper
Edouard Berrocal
  1. Numerical investigation of discriminated forward scattering: optimizing imaging optics for dense sprays
    Abstract / Full Paper
  2. Accounting for multiple scattering, signal attenuation and laser laser extinction using Structured Laser Illumination Planar Imaging
    Abstract / Full Paper
Volfango Bertola
  1. The anti-rebound effect of flexible polymers on impacting drops
    Abstract / Full Paper
Alfio Bisighini
  1. Single drop impact onto a deep pool: experimental observations and theoretical model for the crater evolution
    Abstract / Full Paper
Jean-Bernard Blaisot
  1. Velocity measurements of bubbles in liquid nitrogen
    Abstract / Full Paper
  2. Spatio-temporal analysis of a liquid jet using a sub-picosecond optical gate
    Abstract / Full Paper
Virginel Bodoc
  1. Measurement of bi-component droplet vaporization using Global Rainbow Refractometry
    Abstract
  2. Experimental and numerical investigation of evaporating mono-component droplets in a turbulent channel flow
    Abstract / Full Paper
Michael Bodrov
  1. Optic and electric methods and test procedures for the pulse spray parameters
    Abstract / Full Paper
Jan Boháček
  1. Surface Tension Model for High Viscosity Ratios Implemented in VOF Model
    Abstract / Full Paper
Ali Bolat
  1. Efficiency of different spray application methods in second crop maize
    Abstract / Full Paper
Damien Bonin
  1. Measurement of droplets temperature in a flame by using a global rainbow technique with a pulse laser
    Abstract / Full Paper
Róbert Bordás
  1. Experimental Investigation of Droplet-Droplet Interactions
    Abstract / Full Paper
Nils Bordoni
  1. Droplet Bouncing on Cold Wall: Comparison of Experiments with Direct Numerical Simulations
    Abstract / Full Paper
Francisco Borja Hervás
  1. Characterization of Wall Film Formation from Impinging Diesel Fuel Sprays using LIF
    Abstract / Full Paper
Sergei Boronin
  1. Stability of plane Couette suspension flow with nonuniform particle concentration profile
    Abstract / Full Paper
Sylvain Boulesteix
  1. Size and velocity distributions of droplets in an air-water horizontal pipe flow
    Abstract / Full Paper
Konstantinos Boulouchos
  1. Experimental investigation on the spray behaviour for a hollow cone piezo injector with a multiple injection strategy
    Abstract / Full Paper
  2. Reference Data Generation of Spray Characteristics in Relation to Large 2-Stroke Marine Diesel Engines Using a Novel Spray Combustion Chamber Concept
    Abstract / Full Paper
Benoit Bouvier
  1. Coupling 1D System AMESim and 3D CFD EOLE models for Diesel Injection Simulation
    Abstract / Full Paper
Phil J. Bowen
  1. Numerical Studies of Multiple Droplet Impacts onto a Flat Substrate
    Abstract / Full Paper
  2. Characterisation of a Bio-Ethanol Direct Injection Spray Under Sub-Zero Conditions
    Abstract / Full Paper
Benjamin Brinkmann
  1. Impingement of Single Droplets on a Dry Smooth Surface at high Weber Numbers
    Abstract / Full Paper
Jakub Broukal
  1. Effervescent atomization of extra-light fuel-oil: Experiment and statistical evaluation of spray characteristics
    Abstract / Full Paper
Dieter Brüggemann
  1. Mixture Formation and Combustion of Biodiesel Blended Fuels in a DI Diesel Engine
    Abstract / Full Paper
  2. Application of Laser-Induced Exciplex Fluorescence with Alternative Diesel Fuels
    Abstract
Martin Burby
  1. High Pressure Overlapping Flat Sprays Nozzles
    Abstract / Full Paper
  2. Radial Analysis of Fine Sprays Using Phase Doppler Anemometry (PDA)
    Abstract / Full Paper
Christophe Cachoncinlle
  1. Table-top flash X-ray diagnostics of dodecane sprays
    Abstract / Full Paper
Esteban Calvo
  1. Wavelet analysis of an unsteady air-blasted liquid sheet
    Abstract / Full Paper
  2. Visualization of the Flow in a New Injection Burner
    Abstract
  3. Mode Transitions in an Oscillating Liquid Sheet
    Abstract / Full Paper
Osvaldo Campanella
  1. An Experimental Investigation of Surfactant-Laden non-Newtonian Jet Breakup
    Abstract / Full Paper
Vicent Cantavella
  1. Drying Behavior of High Load Multiphase Droplets at High Temperature Conditions in an Acoustic Levitator
    Abstract / Full Paper
Giuseppe Cantore
  1. A numerical characterization of new high-pressure multi-hole GDI injector
    Abstract / Full Paper
Maria Cárdenas
  1. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
Campbell Carter
  1. Ballistic Imaging in the Near-Field of an Effervescent Spray
    Abstract / Full Paper
Guillaume Castanet
  1. Evidences of turbulent cascading atomization in the bag-breakup regime
    Abstract / Full Paper
  2. Dynamic behaviour of liquid droplets bouncing onto a hot slab
    Abstract / Full Paper
  3. An analytical solution to the spherically symmetric species diffusion equation: application to modelling of heating and evaporation of bi-component droplets
    Abstract / Full Paper
Dorothée Chaillou
  1. Characterization of fuel oil atomizers in industrial operation
    Abstract / Full Paper
Georgios Charalampous
  1. Measurement of continuous liquid jet length in atomizers with optical connectivity, electrical conductivity and high-speed photography techniques
    Abstract / Full Paper
Francois Charru
  1. Size and velocity distributions of droplets in an air-water horizontal pipe flow
    Abstract / Full Paper
Sergio Chiva
  1. Drying Behavior of High Load Multiphase Droplets at High Temperature Conditions in an Acoustic Levitator
    Abstract / Full Paper
Yong-Seok Cho
  1. A Numerical Analysis for the Spray Characteristics of Liquefied n-butane Fuel
    Abstract
M. Chrigui
  1. Effect of Fuel-Evaporation Zone Length on Spray Combustion in a Gas Turbine Combustion Chamber
    Abstract / Full Paper
Christos Chryssakis
  1. Development of a Multi-Component Evaporation Model for Heavy Fuel Oil for Marine Engine Applications
    Abstract
Helmut Ciezki
  1. Several aspects of the atomization behavior of various Newtonian fluids with a like-on-like impinging jet injector
    Abstract / Full Paper
Carlos Corvalan
  1. An Experimental Investigation of Surfactant-Laden non-Newtonian Jet Breakup
    Abstract / Full Paper
Gianpietro Elvio Cossali
  1. Single drop impact onto a deep pool: experimental observations and theoretical model for the crater evolution
    Abstract / Full Paper
  2. Modelling of spray injection from water mist fire suppression systems
    Abstract / Full Paper
Mário Costa
  1. Effect of the Liquid Injection Angle on the Atomization of Liquid Jets in Subsonic Crossflows
    Abstract / Full Paper
Jean Cousin
  1. Numerical Simulations of the Interactions between a Vortex and a Liquid Gas Interface
    Abstract / Full Paper
  2. RANS and SAS analysis of GDI nozzle flow dynamics
    Abstract / Full Paper
Xinguang Cui
  1. Large Eddy Simulation of Flow-Field and Micro-Particle Deposition in an Idealized Mouth-Throat Constricted Tube
    Abstract / Full Paper
Jochen Cypris
  1. Combustion of Diesel sprays under real-engine like conditions: analysis of low- and high-temperature oxidation processes
    Abstract / Full Paper
  2. "Distribution-nozzle" concept: a method for Diesel spray distribution in space for charge homogenization by late injection strategy
    Abstract / Full Paper
Jakub Czajka
  1. Analysis of the fuel distribution in the fuel spray axis
    Abstract
  2. The Qualitative Spray Characteristics of High-Pressure Gasoline Injection System
    Abstract / Full Paper
Michel Daaboul
  1. Experimental study of electrical primary break-up of thin sheets of dielectric liquid controlled by ElectroHydroDynamic actuator
    Abstract / Full Paper
Martin H. Davy
  1. Newtonian Airless Liquid Jet Interaction with a High Speed Moving Surface
    Abstract / Full Paper
Alexis Dechelette
  1. An Experimental Investigation of Surfactant-Laden non-Newtonian Jet Breakup
    Abstract / Full Paper
Devendra Deshmukh
  1. High Pressure Spray Characterization of Vegetable Oils
    Abstract / Full Paper
  2. Effervescent Spray Characterization of Jatropha Pure Plant Oil
    Abstract / Full Paper
Pasquale Di Martino
  1. Study of the Influence of Initial Droplet Size Distribution on a Liquid Jet in Crossflow Model Performance
    Abstract
Vuong Doan
  1. Chaotic disintegration of suspension spray by a cross air flow
    Abstract / Full Paper
Joachim Domnick
  1. Effect of bell geometry in high-speed rotary bell atomization
    Abstract / Full Paper
Sébastien Dozias
  1. Table-top flash X-ray diagnostics of dodecane sprays
    Abstract / Full Paper
Bipro Nath Dubey
  1. Filament breakup of fat-based food emulsions during spraying
    Abstract
  2. Prilling process: an alternative for atomization and producing solid particles of emulsions
    Abstract / Full Paper
Thibaut Dumont
  1. Droplet Bouncing on Cold Wall: Comparison of Experiments with Direct Numerical Simulations
    Abstract / Full Paper
Pierre Dunand
  1. Dynamic behaviour of liquid droplets bouncing onto a hot slab
    Abstract / Full Paper
Franz Durst
  1. Multi-Jet Spray Generation for Small Droplet Production
    Abstract
M.R. Duxenneuner
  1. Filament breakup of fat-based food emulsions during spraying
    Abstract
  2. Prilling process: an alternative for atomization and producing solid particles of emulsions
    Abstract / Full Paper
Donald T. Eadie
  1. Newtonian Airless Liquid Jet Interaction with a High Speed Moving Surface
    Abstract / Full Paper
Gary Eales
  1. Novel External Atomizing Nozzle for Domestic Household Aerosols
    Abstract / Full Paper
Carol Easwick
  1. Experimental investigation of a Single Droplet Interaction with Shear Driven Film
    Abstract / Full Paper
Tjark Eisfeld
  1. Experimental Investigation of Splashing Behaviour on Dry Solid Surfaces under High Parameters
    Abstract / Full Paper
Mohamed Ali El Kamkhi
  1. High Pressure Overlapping Flat Sprays Nozzles
    Abstract / Full Paper
Ahmed Elwardany
  1. An analytical solution to the spherically symmetric species diffusion equation: application to modelling of heating and evaporation of bi-component droplets
    Abstract / Full Paper
Patricia Ern
  1. Size and velocity distributions of droplets in an air-water horizontal pipe flow
    Abstract / Full Paper
Vahid Esfahanian
  1. Effect of Flow Conditions on Spray Cone Angle of a Two-Fluid Atomizer
    Abstract / Full Paper
Ifan Evans
  1. Characterisation of a Bio-Ethanol Direct Injection Spray Under Sub-Zero Conditions
    Abstract / Full Paper
Pablo Fajardo
  1. CFD study of needle motion influence on the spray conditions of single-hole injectors
    Abstract / Full Paper
Nicolas Fdida
  1. Velocity measurements of bubbles in liquid nitrogen
    Abstract / Full Paper
Kamel Fezzaa
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
Fabian Fischer
  1. Primary Breakup Model Considering Spray Core Development
    Abstract / Full Paper
Brian Fleck
  1. Characterization of a Horizontal Two-Phase Spray from an Effervescent Atomizer
    Abstract / Full Paper
  2. Correlations between the Two-Phase Gas/Liquid Spray Break-up Mechanism and the Dimensionless Numbers
    Abstract / Full Paper
Alexandre Dias Flügel
  1. Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect
    Abstract
Stefano Fontanesi
  1. A numerical characterization of new high-pressure multi-hole GDI injector
    Abstract / Full Paper
Bruno Frackowiak
  1. Analysis of the fluorescence signal from a single droplet using a model based on the Lorenz Mie Theory and on ray tracing methods
    Abstract / Full Paper
Stefan Freitag
  1. Measurement of Initial Conditions of a Kerosene Spray from a Generic Aeroengine Injector at Elevated Pressure
    Abstract / Full Paper
  2. High Speed Shadowgraphy of a Combusting Air Blast Atomizer Spray at Elevated Pressure
    Abstract / Full Paper
Bernd Friedrich
  1. Process design of ultrasonic spray pyrolysis synthesis of Ru/TiO2 nanoparticles
    Abstract / Full Paper
Udo Fritsching
  1. Analysis of time-dependend spray structures in spray processes in enclosures with square cross sections
    Abstract / Full Paper
  2. Two phase spray cooling for specific local quenching of workpieces in flexible flow fields
    Abstract / Full Paper
Johannes Fritzer
  1. Evaluation of active control strategies regarding airblast atomisation: assessments under non-evaporating and non-reactive conditions
    Abstract / Full Paper
  2. Concept for a versatile spray test rig for comparison of evaporation between kerosene and replacement fuels for aviation
    Abstract / Full Paper
Sebastian Frohwein
  1. Experimental Investigation of Splashing Behaviour on Dry Solid Surfaces under High Parameters
    Abstract / Full Paper
H. Gen Fujimoto
  1. Spatial Droplets Size Distribution in a Diesel Spray Taken by Photography with Super High Resolution
    Abstract / Full Paper
Jian Gao
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
Juan Antonio García
  1. Mode Transitions in an Oscillating Liquid Sheet
    Abstract / Full Paper
  2. Visualization of the Flow in a New Injection Burner
    Abstract
Marcel Gaspar
  1. Experimental Examination of the Liquid Sheet Disintegration Process Using Combined Photography and Fiber Based Measuring Techniques
    Abstract / Full Paper
Volker Gaukel
  1. Modeling of drop sizes from effervescent atomization of gelatinized starch suspensions
    Abstract / Full Paper
Manolis Gavaises
  1. Modelling of spray injection from water mist fire suppression systems
    Abstract / Full Paper
Sebastian Gepperth
  1. Pre-filming primary atomization: Experiments and modeling
    Abstract / Full Paper
Andre Gipperich
  1. On the Splashing Threshold of a Single Droplet Impacting onto Rough and Porous Surfaces
    Abstract / Full Paper
Thierry Girasole
  1. Spatio-temporal analysis of a liquid jet using a sub-picosecond optical gate
    Abstract / Full Paper
Fabrice Giuliani
  1. Concept for a versatile spray test rig for comparison of evaporation between kerosene and replacement fuels for aviation
    Abstract / Full Paper
  2. Evaluation of active control strategies regarding airblast atomisation: assessments under non-evaporating and non-reactive conditions
    Abstract / Full Paper
Yukihiro Goda
  1. Experimental and Numerical Investigation about internal Cavitating Flow and Primary Atomization of a Large-Scaled VCO Diesel Injector with Eccentric Needle
    Abstract / Full Paper
Steffen Goertz
  1. Drop impact close to a pore: experimental and numerical investigations
    Abstract / Full Paper
Hassan Gomaa
  1. Droplet Bouncing on Cold Wall: Comparison of Experiments with Direct Numerical Simulations
    Abstract / Full Paper
Johana Gomez
  1. Characterization of a Horizontal Two-Phase Spray from an Effervescent Atomizer
    Abstract / Full Paper
Pablo Gómez
  1. Experimental study on the splash/deposition limit in drop impact onto solid surfaces
    Abstract / Full Paper
A. González-Espinosa
  1. Visualization of the Flow in a New Injection Burner
    Abstract
Srikanth Reddy Gopireddy
  1. Modeling and Simulation of Evaporating Water/Nitrogen Spray Using Direct Quadrature Method of Moments
    Abstract
James Gord
  1. Ballistic Imaging in the Near-Field of an Effervescent Spray
    Abstract / Full Paper
Mikhael Gorokhovski
  1. Fragmentation under scaling symmetry and stochastic modeling of a highly turbulent flow with spray
    Abstract
Dmitry Goryntsev
  1. Investigation of Cyclic Variations Effects on Mixing and Combustion Processes in a DISI IC-Engine by Using Large Eddy Simulation
    Abstract / Full Paper
Ilona Gostic
  1. How biodiesel/diesel fuel blends affect spray breakup and emissions
    Abstract / Full Paper
Michel Gradeck
  1. Dynamic behaviour of liquid droplets bouncing onto a hot slab
    Abstract / Full Paper
Simon Gramlich
  1. The trajectory and break-up of a particle laden liquid jet in the centrifugal field
    Abstract / Full Paper
Sheldon I. Green
  1. Newtonian Airless Liquid Jet Interaction with a High Speed Moving Surface
    Abstract / Full Paper
Douglas Greenhalgh
  1. Fuel distribution measurements in a model low NOx double annular combustor using Laser Induced Fluorescence
    Abstract / Full Paper
Gerard Grehan
  1. Measurement of droplets temperature in a flame by using a global rainbow technique with a pulse laser
    Abstract / Full Paper
Frederic Grisch
  1. Measurements of fuel distribution and flame structure in kerosene-fuelled combustors using planar laser-induced fluorescence and OH* emissions
    Abstract / Full Paper
Daniel Guildenbecher
  1. Performance of an effervescent atomizer for geo-engineering purposes
    Abstract
  2. Are Sprays an Answer to Global Warming?
    Abstract / Full Paper
  3. Pre-filming primary atomization: Experiments and modeling
    Abstract / Full Paper
Mustafa Güllü
  1. Efficiency of different spray application methods in second crop maize
    Abstract / Full Paper
Astrid Günther
  1. Discharge characteristics of the atomization of superheated liquids
    Abstract / Full Paper
Eva Gutheil
  1. Large Eddy Simulation of Flow-Field and Micro-Particle Deposition in an Idealized Mouth-Throat Constricted Tube
    Abstract / Full Paper
  2. Modeling and Simulation of Evaporating Water/Nitrogen Spray Using Direct Quadrature Method of Moments
    Abstract
Chawki Habchi
  1. New Correlations for Leidenfrost and Nukiyama Temperatures with Gas Pressure - Application to Liquid Film Boiling Simulation
    Abstract / Full Paper
Constantinos Hadjiyiannis
  1. Measurement of continuous liquid jet length in atomizers with optical connectivity, electrical conductivity and high-speed photography techniques
    Abstract / Full Paper
Thomas Hagemeier
  1. Experimental Investigation of Droplet-Droplet Interactions
    Abstract / Full Paper
Jiří Hájek
  1. Effervescent atomization of extra-light fuel-oil: Experiment and statistical evaluation of spray characteristics
    Abstract / Full Paper
David Hann
  1. Experimental investigation of a Single Droplet Interaction with Shear Driven Film
    Abstract / Full Paper
Yannis Hardalupas
  1. Experimental characterization of isothermal and evaporative sprays
    Abstract / Full Paper
  2. Measurement of continuous liquid jet length in atomizers with optical connectivity, electrical conductivity and high-speed photography techniques
    Abstract / Full Paper
Christoph Hassa
  1. Measurement of Initial Conditions of a Kerosene Spray from a Generic Aeroengine Injector at Elevated Pressure
    Abstract / Full Paper
  2. High Speed Shadowgraphy of a Combusting Air Blast Atomizer Spray at Elevated Pressure
    Abstract / Full Paper
S. Haugg
  1. Application of Laser-Induced Exciplex Fluorescence with Alternative Diesel Fuels
    Abstract
Ted Heidrick
  1. Correlations between the Two-Phase Gas/Liquid Spray Break-up Mechanism and the Dimensionless Numbers
    Abstract / Full Paper
Morgan Heikal
  1. An analytical solution to the spherically symmetric species diffusion equation: application to modelling of heating and evaporation of bi-component droplets
    Abstract / Full Paper
  2. High-speed video observation and phase Doppler anemometry measurements of oil break-up in a model engine crankcase
    Abstract / Full Paper
Barbara Heine
  1. Primary Breakup Model Considering Spray Core Development
    Abstract / Full Paper
Johannes Heinze
  1. Measurement of Initial Conditions of a Kerosene Spray from a Generic Aeroengine Injector at Elevated Pressure
    Abstract / Full Paper
Jérome Helie
  1. A Comparison between One and Two Component Velocity and Size Measurements in a Dense Spray
    Abstract / Full Paper
  2. Numerical Simulations of the Interactions between a Vortex and a Liquid Gas Interface
    Abstract / Full Paper
  3. Multihole gasoline direct injection spray plumes
    Abstract / Full Paper
  4. RANS and SAS analysis of GDI nozzle flow dynamics
    Abstract / Full Paper
Andre Hellmann
  1. Process design of ultrasonic spray pyrolysis synthesis of Ru/TiO2 nanoparticles
    Abstract / Full Paper
Christoph Hennig
  1. Evaluation of active control strategies regarding airblast atomisation: assessments under non-evaporating and non-reactive conditions
    Abstract / Full Paper
Julio Hernández
  1. Experimental study on the splash/deposition limit in drop impact onto solid surfaces
    Abstract / Full Paper
Leonor Hernández
  1. Drying Behavior of High Load Multiphase Droplets at High Temperature Conditions in an Acoustic Levitator
    Abstract / Full Paper
Kai Herrmann
  1. Reference Data Generation of Spray Characteristics in Relation to Large 2-Stroke Marine Diesel Engines Using a Novel Spray Combustion Chamber Concept
    Abstract / Full Paper
Motoki Hiratsuka
  1. Experimental and Numerical Investigation about internal Cavitating Flow and Primary Atomization of a Large-Scaled VCO Diesel Injector with Eccentric Needle
    Abstract / Full Paper
Daniel Hirleman
  1. Performance of an effervescent atomizer for geo-engineering purposes
    Abstract
  2. Are Sprays an Answer to Global Warming?
    Abstract / Full Paper
Bjørn Helge Hjertager
  1. CFD analysis of non-evaporating sprays using the DQMOM method
    Abstract / Full Paper
Andreas Höfler
  1. Heat and Mass Transfer accompanied by Crystallisation of single Particles containing Urea-water-solution
    Abstract / Full Paper
Jung-Goo Hong
  1. An experimental investigation of discharge coefficient and cavitation length in the elliptical nozzles
    Abstract / Full Paper
Radek Horálek
  1. EHD sprays as a seeding agens for PIV system measurements
    Abstract / Full Paper
Jiří Horčička
  1. EHD sprays as a seeding agens for PIV system measurements
    Abstract / Full Paper
Tsukasa Hori
  1. Spatial Droplets Size Distribution in a Diesel Spray Taken by Photography with Super High Resolution
    Abstract / Full Paper
Sergio Hoyas
  1. CFD study of needle motion influence on the spray conditions of single-hole injectors
    Abstract / Full Paper
Andreas Hubert
  1. Injection Spray Comparison of Diesel Fuel and Cold Pressed Rape Seed Oil Fuel
    Abstract / Full Paper
Rana Muhammed Humza
  1. Modeling and Simulation of Evaporating Water/Nitrogen Spray Using Direct Quadrature Method of Moments
    Abstract
Martin Hunkel
  1. Two phase spray cooling for specific local quenching of workpieces in flexible flow fields
    Abstract / Full Paper
Christian Hüttl
  1. Application of Laser-Induced Exciplex Fluorescence with Alternative Diesel Fuels
    Abstract
  2. Mixture Formation and Combustion of Biodiesel Blended Fuels in a DI Diesel Engine
    Abstract / Full Paper
Said Idlahcen
  1. Spatio-temporal analysis of a liquid jet using a sub-picosecond optical gate
    Abstract / Full Paper
Kyoung‐su Im
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
Keita Imano
  1. Improvement of Atomization Characteristics of Spray by Multi Hole Nozzle for Pressure Atomized Type Injector
    Abstract / Full Paper
Takao Inamura
  1. Experimental study on the pulsation of a liquid jet issued from a coaxial injector
    Abstract / Full Paper
Johannes Janicka
  1. Investigation of Cyclic Variations Effects on Mixing and Combustion Processes in a DISI IC-Engine by Using Large Eddy Simulation
    Abstract / Full Paper
  2. Effect of Fuel-Evaporation Zone Length on Spray Combustion in a Gas Turbine Combustion Chamber
    Abstract / Full Paper
Juan Carlos Jarque
  1. Drying Behavior of High Load Multiphase Droplets at High Temperature Conditions in an Acoustic Levitator
    Abstract / Full Paper
Darina Jašíková
  1. EHD sprays as a seeding agens for PIV system measurements
    Abstract / Full Paper
Jan Jedelský
  1. Novel Modifications of Twin-fluid Atomizers: Performance, Advantages and Drawbacks
    Abstract / Full Paper
  2. Effervescent atomization of extra-light fuel-oil: Experiment and statistical evaluation of spray characteristics
    Abstract / Full Paper
  3. A Comparison between One and Two Component Velocity and Size Measurements in a Dense Spray
    Abstract / Full Paper
Miroslav Jícha
  1. Novel Modifications of Twin-fluid Atomizers: Performance, Advantages and Drawbacks
    Abstract / Full Paper
Franz Joos
  1. Experimental Investigation of Splashing Behaviour on Dry Solid Surfaces under High Parameters
    Abstract / Full Paper
Jose Enrique Juliá
  1. Drying Behavior of High Load Multiphase Droplets at High Temperature Conditions in an Acoustic Levitator
    Abstract / Full Paper
Lambros Kaiktsis
  1. Development of a Multi-Component Evaporation Model for Heavy Fuel Oil for Marine Engine Applications
    Abstract
Davood Kalantari
  1. Influence of Surface Roughness in Spray/Wall interaction Phenomena
    Abstract / Full Paper
Satoshi Kanaike
  1. Experimental and Numerical Investigation about internal Cavitating Flow and Primary Atomization of a Large-Scaled VCO Diesel Injector with Eccentric Needle
    Abstract / Full Paper
Mohammad Karaen
  1. Effervescent Atomization of Diesel Fuel Containing Dissolved CO2
    Abstract / Full Paper
Atsushi Kato
  1. Improvement of Atomization Characteristics of Spray by Multi Hole Nozzle for Pressure Atomized Type Injector
    Abstract / Full Paper
Kosuke Kato
  1. Improvement of Atomization Characteristics of Spray by Multi Hole Nozzle for Pressure Atomized Type Injector
    Abstract / Full Paper
Tatsuya Kawaguchi
  1. Dynamic ILIDS measurement by means of high-speed Nd:YLF laser
    Abstract / Full Paper
Satoshi Kawauchi
  1. Droplet Collision Modelling between Merging Immiscible Sprays in Direct Water Injection System
    Abstract / Full Paper
Peter J. Kay
  1. Characterisation of a Bio-Ethanol Direct Injection Spray Under Sub-Zero Conditions
    Abstract / Full Paper
  2. Numerical Studies of Multiple Droplet Impacts onto a Flat Substrate
    Abstract / Full Paper
Bavand Keshavarz
  1. Newtonian Airless Liquid Jet Interaction with a High Speed Moving Surface
    Abstract / Full Paper
Ji-Hun Kim
  1. A Numerical Analysis for the Spray Characteristics of Liquefied n-butane Fuel
    Abstract
Sung-Ryoul Kim
  1. An experimental investigation of discharge coefficient and cavitation length in the elliptical nozzles
    Abstract / Full Paper
J. King
  1. Characterisation of a Bio-Ethanol Direct Injection Spray Under Sub-Zero Conditions
    Abstract / Full Paper
Paul Kippax
  1. Effects of viscosity, pump mechanism and nozzle geomerty on nasal spray droplet size
    Abstract / Full Paper
Koichi Kitami
  1. Experimental study on the pulsation of a liquid jet issued from a coaxial injector
    Abstract / Full Paper
Reinhold Kneer
  1. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
  2. The Influence of Fuel Properties on Spray Propagation, Atomization and Evaporation
    Abstract / Full Paper
G. Knight
  1. Characterisation of a Bio-Ethanol Direct Injection Spray Under Sub-Zero Conditions
    Abstract / Full Paper
Rainer Koch
  1. Pre-filming primary atomization: Experiments and modeling
    Abstract / Full Paper
  2. An extension of dynamic droplet deformation models to secondary atomization
    Abstract / Full Paper
  3. Heat and Mass Transfer accompanied by Crystallisation of single Particles containing Urea-water-solution
    Abstract / Full Paper
Boris Terje Kohnen
  1. Measurement of the droplet size distribution of a full cone nozzle
    Abstract / Full Paper
Tetsuya Kon
  1. Experimental study on the pulsation of a liquid jet issued from a coaxial injector
    Abstract / Full Paper
Siniša Kontin
  1. Heat and Mass Transfer accompanied by Crystallisation of single Particles containing Urea-water-solution
    Abstract / Full Paper
Václav Kopecký
  1. EHD sprays as a seeding agens for PIV system measurements
    Abstract / Full Paper
Michal Kotek
  1. EHD sprays as a seeding agens for PIV system measurements
    Abstract / Full Paper
Elias Kristensson
  1. Accounting for multiple scattering, signal attenuation and laser laser extinction using Structured Laser Illumination Planar Imaging
    Abstract / Full Paper
Pavel Krutitskii
  1. An analytical solution to the spherically symmetric species diffusion equation: application to modelling of heating and evaporation of bi-component droplets
    Abstract / Full Paper
Kun-Woo Ku
  1. An experimental investigation of discharge coefficient and cavitation length in the elliptical nozzles
    Abstract / Full Paper
Benjamin Küpper
  1. Measurement of the droplet size distribution of a full cone nozzle
    Abstract / Full Paper
Matthias Kuschel
  1. Experimental investigation of droplet collisions with higher viscosity
    Abstract / Full Paper
Ming‐Chia Lai
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
Aljoscha Lampa
  1. Analysis of time-dependend spray structures in spray processes in enclosures with square cross sections
    Abstract / Full Paper
Andreas Lang
  1. Concept for a versatile spray test rig for comparison of evaporation between kerosene and replacement fuels for aviation
    Abstract / Full Paper
Gerard Lavergne
  1. Measurement of bi-component droplet vaporization using Global Rainbow Refractometry
    Abstract
  2. Experimental and numerical investigation of evaporating mono-component droplets in a turbulent channel flow
    Abstract / Full Paper
  3. Numerical and experimental study of aircraft engine ignition
    Abstract / Full Paper
Renaud Lecourt
  1. Numerical and experimental study of aircraft engine ignition
    Abstract / Full Paper
Choong-Won Lee
  1. An experimental investigation of discharge coefficient and cavitation length in the elliptical nozzles
    Abstract / Full Paper
Seang-Wock Lee
  1. A Numerical Analysis for the Spray Characteristics of Liquefied n-butane Fuel
    Abstract
Cedric Leger
  1. Multihole gasoline direct injection spray plumes
    Abstract / Full Paper
Ulrich Leidenberger
  1. Mixture Formation and Combustion of Biodiesel Blended Fuels in a DI Diesel Engine
    Abstract / Full Paper
  2. Application of Laser-Induced Exciplex Fluorescence with Alternative Diesel Fuels
    Abstract
Alfred Leipertz
  1. Effect of fuel properties on primary breakup and spray formation studied on a gasoline 3-hole nozzle
    Abstract / Full Paper
  2. Influence of fuel mixture on spray formation in diesel processes
    Abstract / Full Paper
  3. Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect
    Abstract
Thomas Leitgeb
  1. Evaluation of active control strategies regarding airblast atomisation: assessments under non-evaporating and non-reactive conditions
    Abstract / Full Paper
  2. Concept for a versatile spray test rig for comparison of evaporation between kerosene and replacement fuels for aviation
    Abstract / Full Paper
Franck Lelong
  1. Dynamic behaviour of liquid droplets bouncing onto a hot slab
    Abstract / Full Paper
Andreas Lembach
  1. On the Splashing Threshold of a Single Droplet Impacting onto Rough and Porous Surfaces
    Abstract / Full Paper
  2. Drop impact close to a pore: experimental and numerical investigations
    Abstract / Full Paper
Fabrice Lemoine
  1. An analytical solution to the spherically symmetric species diffusion equation: application to modelling of heating and evaporation of bi-component droplets
    Abstract / Full Paper
Bertrand Leroux
  1. Characterization of fuel oil atomizers in industrial operation
    Abstract / Full Paper
Moti Levi
  1. Spray Formation from Homogeneous Flash-Boiling Liquid Jets
    Abstract / Full Paper
Peng Li
  1. Influence of cavitation on atomisation at low pressures using up-scaled and transparent nozzles
    Abstract / Full Paper
Guillaume Linassier
  1. Numerical and experimental study of aircraft engine ignition
    Abstract / Full Paper
Mark Linne
  1. Numerical investigation of discriminated forward scattering: optimizing imaging optics for dense sprays
    Abstract / Full Paper
  2. Ballistic Imaging in the Near-Field of an Effervescent Spray
    Abstract / Full Paper
Eva Maria Littringer
  1. Tailoring particle morphology of spray-dried mannitol carrier particles by variation of drying outlet temperature
    Abstract / Full Paper
Zunping Liu
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
Russel Lockett
  1. Fuel distribution measurements in a model low NOx double annular combustor using Laser Induced Fluorescence
    Abstract / Full Paper
Joaquín López
  1. Experimental study on the splash/deposition limit in drop impact onto solid surfaces
    Abstract / Full Paper
Britta Loskand
  1. Measured Velocities and Pressure Profile inside a Twin-Fluid Atomizer
    Abstract / Full Paper
Christophe Louste
  1. Experimental study of electrical primary break-up of thin sheets of dielectric liquid controlled by ElectroHydroDynamic actuator
    Abstract / Full Paper
Antonio Lozano
  1. Visualization of the Flow in a New Injection Burner
    Abstract
  2. Mode Transitions in an Oscillating Liquid Sheet
    Abstract / Full Paper
  3. Wavelet analysis of an unsteady air-blasted liquid sheet
    Abstract / Full Paper
F. Luck
  1. Size and velocity distributions of droplets in an air-water horizontal pipe flow
    Abstract / Full Paper
Vivak Luckhchoura
  1. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
Michael Lutz
  1. Influence of fuel mixture on spray formation in diesel processes
    Abstract / Full Paper
Oisín Fergal Peter Lyons
  1. Particle Sizing and Flow Measurements in an Atomizing Mist Jet Nozzle: A Shadowgraphy Approach
    Abstract / Full Paper
Avulapati Madan Mohan
  1. High Pressure Spray Characterization of Vegetable Oils
    Abstract / Full Paper
  2. Effervescent Spray Characterization of Jatropha Pure Plant Oil
    Abstract / Full Paper
Alf Magnusson
  1. Characterization of Wall Film Formation from Impinging Diesel Fuel Sprays using LIF
    Abstract / Full Paper
T.M.A. Maksoud
  1. Combustion of Diesel sprays under real-engine like conditions: analysis of low- and high-temperature oxidation processes
    Abstract / Full Paper
Simone Malaguti
  1. A numerical characterization of new high-pressure multi-hole GDI injector
    Abstract / Full Paper
Ezio Mancaruso
  1. Bio- and Mineral-Fuel Spray Evolution in Non-Evaporating and Evaporating Conditions by Image Processing Techniques
    Abstract / Full Paper
Richard Marcer
  1. Coupling 1D System AMESim and 3D CFD EOLE models for Diesel Injection Simulation
    Abstract / Full Paper
Marco Marengo
  1. Statistical analysis of water drop impact on surfaces with variable wettability
    Abstract / Full Paper
  2. Wavelet analysis of an unsteady air-blasted liquid sheet
    Abstract / Full Paper
Xandra Margot
  1. CFD study of needle motion influence on the spray conditions of single-hole injectors
    Abstract / Full Paper
D. Martin
  1. The Influence of Fuel Properties on Spray Propagation, Atomization and Evaporation
    Abstract / Full Paper
N. Marubayashi
  1. Spatial Droplets Size Distribution in a Diesel Spray Taken by Photography with Super High Resolution
    Abstract / Full Paper
Dmytro Maslennikov
  1. Analysis of the fuel distribution in the fuel spray axis
    Abstract
  2. The Qualitative Spray Characteristics of High-Pressure Gasoline Injection System
    Abstract / Full Paper
Florian Mathieu
  1. The Influence of Fuel Properties on Spray Propagation, Atomization and Evaporation
    Abstract / Full Paper
Jennifer McMillan
  1. Characterization of a Horizontal Two-Phase Spray from an Effervescent Atomizer
    Abstract / Full Paper
Loïc Méès
  1. Spatio-temporal analysis of a liquid jet using a sub-picosecond optical gate
    Abstract / Full Paper
Ulrich Meier
  1. Measurement of Initial Conditions of a Kerosene Spray from a Generic Aeroengine Injector at Elevated Pressure
    Abstract / Full Paper
Thibaut Menard
  1. Numerical Simulations of the Interactions between a Vortex and a Liquid Gas Interface
    Abstract / Full Paper
Axel Mescher
  1. Breakup of stretched liquid threads at low gas relative velocities – Comparison of the laminar rotary atomization to the gravity condition
    Abstract / Full Paper
  2. Tailoring particle morphology of spray-dried mannitol carrier particles by variation of drying outlet temperature
    Abstract / Full Paper
Terrence Meyer
  1. Ballistic Imaging in the Near-Field of an Effervescent Spray
    Abstract / Full Paper
Ana Moita
  1. Assessment of heat transfer measurements at droplet/wall interactions: relation with the impact conditions
    Abstract / Full Paper
  2. Heat transfer mechanisms at drop/wall interactions: experiments and theory
    Abstract / Full Paper
Mehdi Mojtabi
  1. Experimental investigation on the spray behaviour for a hollow cone piezo injector with a multiple injection strategy
    Abstract / Full Paper
  2. A Comparison between One and Two Component Velocity and Size Measurements in a Dense Spray
    Abstract / Full Paper
  3. Multihole gasoline direct injection spray plumes
    Abstract / Full Paper
Thorsten Möller
  1. Impingement of Single Droplets on a Dry Smooth Surface at high Weber Numbers
    Abstract / Full Paper
Rosa Mondrágon
  1. Drying Behavior of High Load Multiphase Droplets at High Temperature Conditions in an Acoustic Levitator
    Abstract / Full Paper
Alessandro Montanaro
  1. Bio- and Mineral-Fuel Spray Evolution in Non-Evaporating and Evaporating Conditions by Image Processing Techniques
    Abstract / Full Paper
Seoksu Moon
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
Florian Moreau
  1. Experimental and numerical investigation of evaporating mono-component droplets in a turbulent channel flow
    Abstract / Full Paper
António Moreira
  1. Heat transfer mechanisms at drop/wall interactions: experiments and theory
    Abstract / Full Paper
  2. Assessment of heat transfer measurements at droplet/wall interactions: relation with the impact conditions
    Abstract / Full Paper
  3. Physical analysis of multimodality in atomization processes
    Abstract / Full Paper
Steffen Mößner
  1. High Speed Shadowgraphy of a Combusting Air Blast Atomizer Spray at Elevated Pressure
    Abstract / Full Paper
Heinrich Müller
  1. Experimental Examination of the Liquid Sheet Disintegration Process Using Combined Photography and Fiber Based Measuring Techniques
    Abstract / Full Paper
Kai-Uwe Münch
  1. Prediction of Spray Penetration for DI Engines by means of a New Application Tool
    Abstract / Full Paper
Darina B. Murray
  1. Particle Sizing and Flow Measurements in an Atomizing Mist Jet Nozzle: A Shadowgraphy Approach
    Abstract / Full Paper
Emir Musemic
  1. Experimental Examination of the Liquid Sheet Disintegration Process Using Combined Photography and Fiber Based Measuring Techniques
    Abstract / Full Paper
  2. Measurement of the droplet size distribution of a full cone nozzle
    Abstract / Full Paper
Ghasem Nasr
  1. High Pressure Overlapping Flat Sprays Nozzles
    Abstract / Full Paper
  2. Radial Analysis of Fine Sprays Using Phase Doppler Anemometry (PDA)
    Abstract / Full Paper
Alexandr Nazarov
  1. Optic and electric methods and test procedures for the pulse spray parameters
    Abstract / Full Paper
  2. The effect of co-current gas velocity on heat transfer of the pulse spray
    Abstract / Full Paper
Michele Negri
  1. Several aspects of the atomization behavior of various Newtonian fluids with a like-on-like impinging jet injector
    Abstract / Full Paper
Orietta Nicolis
  1. Wavelet analysis of an unsteady air-blasted liquid sheet
    Abstract / Full Paper
Allan Holm Nielsen
  1. CFD analysis of non-evaporating sprays using the DQMOM method
    Abstract / Full Paper
Soo-Young No
  1. Spray Characteristics in CI engines Fuelled with Vegetable Oils and Its Derivatives-A Review
    Abstract / Full Paper
Amir Nourian
  1. High Pressure Overlapping Flat Sprays Nozzles
    Abstract / Full Paper
  2. Radial Analysis of Fine Sprays Using Phase Doppler Anemometry (PDA)
    Abstract / Full Paper
Hans Nuglisch
  1. RANS and SAS analysis of GDI nozzle flow dynamics
    Abstract / Full Paper
Yoshio Nunome
  1. Experimental study on the pulsation of a liquid jet issued from a coaxial injector
    Abstract / Full Paper
Raúl Ochoterena
  1. Influence of cavitation on atomisation at low pressures using up-scaled and transparent nozzles
    Abstract / Full Paper
Tetsuya Oda
  1. Experimental and Numerical Investigation about internal Cavitating Flow and Primary Atomization of a Large-Scaled VCO Diesel Injector with Eccentric Needle
    Abstract / Full Paper
Katsuyuki Ohsawa
  1. Experimental and Numerical Investigation about internal Cavitating Flow and Primary Atomization of a Large-Scaled VCO Diesel Injector with Eccentric Needle
    Abstract / Full Paper
Tsuyoshi Okamoto
  1. Dynamic Analysis of Two Rotating-Particles Collision Process by Molecular Dynamics Method
    Abstract
  2. Dynamic Analysis of Particle - Moving Solid Surface Interaction by Molecular Dynamics Method
    Abstract
Jason Olfert
  1. Characterization of a Horizontal Two-Phase Spray from an Effervescent Atomizer
    Abstract / Full Paper
Yuki Omori
  1. Dynamic Analysis of Particle - Moving Solid Surface Interaction by Molecular Dynamics Method
    Abstract
Mikael Orain
  1. Measurements of fuel distribution and flame structure in kerosene-fuelled combustors using planar laser-induced fluorescence and OH* emissions
    Abstract / Full Paper
Alexander Osiptsov
  1. Stability of plane Couette suspension flow with nonuniform particle concentration profile
    Abstract / Full Paper
Ranjani Padmanabhan
  1. Performance of an effervescent atomizer for geo-engineering purposes
    Abstract
Maxim A. Pakhomov
  1. Effect of Confinement on Heat Transfer Between Gas-Droplets Round Impinging Jet and Flat Plate
    Abstract / Full Paper
Julián Palacios
  1. Experimental study on the splash/deposition limit in drop impact onto solid surfaces
    Abstract / Full Paper
Miguel R. Oliveira Panão
  1. Physical analysis of multimodality in atomization processes
    Abstract / Full Paper
Rahul Pardeshi
  1. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
Heung Soo Park
  1. Preliminary Study on the Granulation of the Molten Slag
    Abstract
Rishin Patel
  1. The Effect of Swirl on Air/Fuel Mixing in a 4 Valve GDI Engine
    Abstract / Full Paper
Stavroula Patouna
  1. CFD study of needle motion influence on the spray conditions of single-hole injectors
    Abstract / Full Paper
Béatrice Patte
  1. Velocity measurements of bubbles in liquid nitrogen
    Abstract / Full Paper
Xavier Paubel
  1. Characterization of fuel oil atomizers in industrial operation
    Abstract / Full Paper
Tim Persoons
  1. Particle Sizing and Flow Measurements in an Atomizing Mist Jet Nozzle: A Shadowgraphy Approach
    Abstract / Full Paper
Norbert Peters
  1. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
Tim Phillips
  1. Numerical Studies of Multiple Droplet Impacts onto a Flat Substrate
    Abstract / Full Paper
Ireneusz Pielecha
  1. The Qualitative Spray Characteristics of High-Pressure Gasoline Injection System
    Abstract / Full Paper
  2. Analysis of the fuel distribution in the fuel spray axis
    Abstract
Manfred Piesche
  1. The trajectory and break-up of a particle laden liquid jet in the centrifugal field
    Abstract / Full Paper
Graham Pitcher
  1. The Effect of Swirl on Air/Fuel Mixing in a 4 Valve GDI Engine
    Abstract / Full Paper
Jean Michel Pouvesle
  1. Table-top flash X-ray diagnostics of dodecane sprays
    Abstract / Full Paper
Lucian Radu
  1. Physical analysis of multimodality in atomization processes
    Abstract
Raffaele Ragucci
  1. Study of the Influence of Initial Droplet Size Distribution on a Liquid Jet in Crossflow Model Performance
    Abstract
Mohammad Rahman
  1. Correlations between the Two-Phase Gas/Liquid Spray Break-up Mechanism and the Dimensionless Numbers
    Abstract / Full Paper
R.V. Ravikrishna
  1. Effervescent Spray Characterization of Jatropha Pure Plant Oil
    Abstract / Full Paper
  2. High Pressure Spray Characterization of Vegetable Oils
    Abstract / Full Paper
Manuel Reddemann
  1. The Influence of Fuel Properties on Spray Propagation, Atomization and Evaporation
    Abstract / Full Paper
Nicolas Rimbert
  1. Evidences of turbulent cascading atomization in the bag-breakup regime
    Abstract / Full Paper
Eric Robert
  1. Table-top flash X-ray diagnostics of dodecane sprays
    Abstract / Full Paper
Ilia Roisman
  1. Chaotic disintegration of suspension spray by a cross air flow
    Abstract / Full Paper
  2. Single drop impact onto a deep pool: experimental observations and theoretical model for the crater evolution
    Abstract / Full Paper
  3. On the Splashing Threshold of a Single Droplet Impacting onto Rough and Porous Surfaces
    Abstract / Full Paper
  4. Drop impact close to a pore: experimental and numerical investigations
    Abstract / Full Paper
  5. Heat transfer mechanisms at drop/wall interactions: experiments and theory
    Abstract / Full Paper
Hubert Romat
  1. Experimental study of electrical primary break-up of thin sheets of dielectric liquid controlled by ElectroHydroDynamic actuator
    Abstract / Full Paper
M. Rossmeissl
  1. Discharge characteristics of the atomization of superheated liquids
    Abstract / Full Paper
Norbert Roth
  1. Droplet Bouncing on Cold Wall: Comparison of Experiments with Direct Numerical Simulations
    Abstract / Full Paper
Rossella Rotondi
  1. Multihole gasoline direct injection spray plumes
    Abstract / Full Paper
Beat von Rotz
  1. Reference Data Generation of Spray Characteristics in Relation to Large 2-Stroke Marine Diesel Engines Using a Novel Spray Combustion Chamber Concept
    Abstract / Full Paper
Eric Rouland
  1. Velocity measurements of bubbles in liquid nitrogen
    Abstract / Full Paper
Olivier Rouzaud
  1. Experimental and numerical investigation of evaporating mono-component droplets in a turbulent channel flow
    Abstract / Full Paper
  2. Measurement of bi-component droplet vaporization using Global Rainbow Refractometry
    Abstract
Claude Rozé
  1. Spatio-temporal analysis of a liquid jet using a sub-picosecond optical gate
    Abstract / Full Paper
Pierre Ruyer
  1. Dynamic behaviour of liquid droplets bouncing onto a hot slab
    Abstract / Full Paper
Sung Uk Ryu
  1. Preliminary Study on the Granulation of the Molten Slag
    Abstract
Amsini Sadiki
  1. Investigation of Cyclic Variations Effects on Mixing and Combustion Processes in a DISI IC-Engine by Using Large Eddy Simulation
    Abstract / Full Paper
  2. Effect of Fuel-Evaporation Zone Length on Spray Combustion in a Gas Turbine Combustion Chamber
    Abstract / Full Paper
Sawitree Saengkaew
  1. Measurement of droplets temperature in a flame by using a global rainbow technique with a pulse laser
    Abstract / Full Paper
Srikrishna Sahu
  1. Experimental characterization of isothermal and evaporative sprays
    Abstract / Full Paper
Takushi Saito
  1. Dynamic ILIDS measurement by means of high-speed Nd:YLF laser
    Abstract / Full Paper
Hikmet Sarihan
  1. Efficiency of different spray application methods in second crop maize
    Abstract / Full Paper
Isao Satoh
  1. Dynamic ILIDS measurement by means of high-speed Nd:YLF laser
    Abstract / Full Paper
Sergei Sazhin
  1. An analytical solution to the spherically symmetric species diffusion equation: application to modelling of heating and evaporation of bi-component droplets
    Abstract / Full Paper
Marc Schlender
  1. Modeling of drop sizes from effervescent atomization of gelatinized starch suspensions
    Abstract / Full Paper
Roland Schmehl
  1. An extension of dynamic droplet deformation models to secondary atomization
    Abstract / Full Paper
Andreas Schmid
  1. Experimental investigation on the spray behaviour for a hollow cone piezo injector with a multiple injection strategy
    Abstract / Full Paper
L. Schmidt
  1. Characterisation of a Bio-Ethanol Direct Injection Spray Under Sub-Zero Conditions
    Abstract / Full Paper
Ingo Schmitz
  1. Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect
    Abstract
  2. Effect of fuel properties on primary breakup and spray formation studied on a gasoline 3-hole nozzle
    Abstract / Full Paper
Bruno Schneider
  1. Reference Data Generation of Spray Characteristics in Relation to Large 2-Stroke Marine Diesel Engines Using a Novel Spray Combustion Chamber Concept
    Abstract / Full Paper
  2. Experimental investigation on the spray behaviour for a hollow cone piezo injector with a multiple injection strategy
    Abstract / Full Paper
Jewe Schröder
  1. Modeling of drop sizes from effervescent atomization of gelatinized starch suspensions
    Abstract / Full Paper
Michael Schroeder
  1. Process design of ultrasonic spray pyrolysis synthesis of Ru/TiO2 nanoparticles
    Abstract / Full Paper
Heike P. Schuchmann
  1. Modeling of drop sizes from effervescent atomization of gelatinized starch suspensions
    Abstract / Full Paper
Sven Schuettenberg
  1. Two phase spray cooling for specific local quenching of workpieces in flexible flow fields
    Abstract / Full Paper
Reiner Schulz
  1. Reference Data Generation of Spray Characteristics in Relation to Large 2-Stroke Marine Diesel Engines Using a Novel Spray Combustion Chamber Concept
    Abstract / Full Paper
David Sedarsky
  1. Ballistic Imaging in the Near-Field of an Effervescent Spray
    Abstract / Full Paper
  2. Numerical investigation of discriminated forward scattering: optimizing imaging optics for dense sprays
    Abstract / Full Paper
Nathalie Seiler
  1. Dynamic behaviour of liquid droplets bouncing onto a hot slab
    Abstract / Full Paper
Jiro Senda
  1. Spatial Droplets Size Distribution in a Diesel Spray Taken by Photography with Super High Resolution
    Abstract / Full Paper
Clemens Senghaas
  1. How biodiesel/diesel fuel blends affect spray breakup and emissions
    Abstract / Full Paper
Luigi Sequino
  1. Bio- and Mineral-Fuel Spray Evolution in Non-Evaporating and Evaporating Conditions by Image Processing Techniques
    Abstract / Full Paper
Guillaume de Sercey
  1. High-speed video observation and phase Doppler anemometry measurements of oil break-up in a model engine crankcase
    Abstract / Full Paper
Anatoly Serov
  1. Optic and electric methods and test procedures for the pulse spray parameters
    Abstract / Full Paper
  2. The effect of co-current gas velocity on heat transfer of the pulse spray
    Abstract / Full Paper
Maziar Shafaee
  1. Effect of Flow Conditions on Spray Cone Angle of a Two-Fluid Atomizer
    Abstract / Full Paper
Rajab Sharief
  1. Novel External Atomizing Nozzle for Domestic Household Aerosols
    Abstract / Full Paper
Abhinav Sharma
  1. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
Konstantin Sharov
  1. The effect of co-current gas velocity on heat transfer of the pulse spray
    Abstract / Full Paper
Eran Sher
  1. Criteria for breakup of droplets
    Abstract
  2. Spray Formation from Homogeneous Flash-Boiling Liquid Jets
    Abstract / Full Paper
  3. Effervescent Atomization of Diesel Fuel Containing Dissolved CO2
    Abstract / Full Paper
Ilai Sher
  1. Stability and breakup of transient jets
    Abstract
  2. Criteria for breakup of droplets
    Abstract
Junmei Shi
  1. Numerical investigation of fuel property effect on cavitating flow in generic fuel injection nozzle geometries
    Abstract / Full Paper
  2. RANS and SAS analysis of GDI nozzle flow dynamics
    Abstract / Full Paper
Minori Shirota
  1. Experimental study on the pulsation of a liquid jet issued from a coaxial injector
    Abstract / Full Paper
Valery Simakov
  1. Optic and electric methods and test procedures for the pulse spray parameters
    Abstract / Full Paper
Michael Smith
  1. The anti-rebound effect of flexible polymers on impacting drops
    Abstract / Full Paper
Paul Sojka
  1. Performance of an effervescent atomizer for geo-engineering purposes
    Abstract
  2. Modeling of drop sizes from effervescent atomization of gelatinized starch suspensions
    Abstract / Full Paper
  3. Are Sprays an Answer to Global Warming?
    Abstract / Full Paper
  4. An Experimental Investigation of Surfactant-Laden non-Newtonian Jet Breakup
    Abstract / Full Paper
Tron Solberg
  1. CFD analysis of non-evaporating sprays using the DQMOM method
    Abstract / Full Paper
Martin Sommerfeld
  1. Experimental investigation of droplet collisions with higher viscosity
    Abstract / Full Paper
Giancarlo Sorrentino
  1. Study of the Influence of Initial Droplet Size Distribution on a Liquid Jet in Crossflow Model Performance
    Abstract
João Sousa
  1. Effect of the Liquid Injection Angle on the Atomization of Liquid Jets in Subsonic Crossflows
    Abstract / Full Paper
Alper Soysal
  1. Efficiency of different spray application methods in second crop maize
    Abstract / Full Paper
Nikolaos Stamoudis
  1. Development of a Multi-Component Evaporation Model for Heavy Fuel Oil for Marine Engine Applications
    Abstract
Phil Stansfield
  1. The Effect of Swirl on Air/Fuel Mixing in a 4 Valve GDI Engine
    Abstract / Full Paper
Joseph Stewart
  1. Radial Analysis of Fine Sprays Using Phase Doppler Anemometry (PDA)
    Abstract / Full Paper
Srecko Stopic
  1. Process design of ultrasonic spray pyrolysis synthesis of Ru/TiO2 nanoparticles
    Abstract / Full Paper
Florian Straßburger
  1. Measurement of the droplet size distribution of a full cone nozzle
    Abstract / Full Paper
Julie Suman
  1. Effects of viscosity, pump mechanism and nozzle geomerty on nasal spray droplet size
    Abstract / Full Paper
Hiroshi Tajima
  1. Droplet Collision Modelling between Merging Immiscible Sprays in Direct Water Injection System
    Abstract / Full Paper
Yuji Takizawa
  1. Dynamic Analysis of Two Rotating-Particles Collision Process by Molecular Dynamics Method
    Abstract
Nobushige Tamaki
  1. Improvement of Atomization Characteristics of Spray by Multi Hole Nozzle for Pressure Atomized Type Injector
    Abstract / Full Paper
Hiroshi Tamura
  1. Experimental study on the pulsation of a liquid jet issued from a coaxial injector
    Abstract / Full Paper
Alexander M.K.P. Taylor
  1. Experimental characterization of isothermal and evaporative sprays
    Abstract / Full Paper
  2. Measurement of continuous liquid jet length in atomizers with optical connectivity, electrical conductivity and high-speed photography techniques
    Abstract / Full Paper
Viktor I. Terekhov
  1. Effect of Confinement on Heat Transfer Between Gas-Droplets Round Impinging Jet and Flat Plate
    Abstract / Full Paper
  2. The effect of co-current gas velocity on heat transfer of the pulse spray
    Abstract / Full Paper
Andreas Theodorakakos
  1. Modelling of spray injection from water mist fire suppression systems
    Abstract / Full Paper
Dominique Thévenin
  1. Experimental Investigation of Droplet-Droplet Interactions
    Abstract / Full Paper
Phil Threlfall-Holmes
  1. The Stable distribution as a physically meaningful description of the size distribution from Rayleigh resonance jet break up type atomisers
    Abstract / Full Paper
Simona Tonini
  1. Modelling of spray injection from water mist fire suppression systems
    Abstract / Full Paper
Philippe Traore
  1. Experimental study of electrical primary break-up of thin sheets of dielectric liquid controlled by ElectroHydroDynamic actuator
    Abstract / Full Paper
Cameron Tropea
  1. Influence of Surface Roughness in Spray/Wall interaction Phenomena
    Abstract / Full Paper
  2. Chaotic disintegration of suspension spray by a cross air flow
    Abstract / Full Paper
  3. Single drop impact onto a deep pool: experimental observations and theoretical model for the crater evolution
    Abstract / Full Paper
  4. Primary Breakup Model Considering Spray Core Development
    Abstract / Full Paper
  5. On the Splashing Threshold of a Single Droplet Impacting onto Rough and Porous Surfaces
    Abstract / Full Paper
  6. Drop impact close to a pore: experimental and numerical investigations
    Abstract / Full Paper
  7. Analysis of the fluorescence signal from a single droplet using a model based on the Lorenz Mie Theory and on ray tracing methods
    Abstract / Full Paper
Rémi Tsiava
  1. Characterization of fuel oil atomizers in industrial operation
    Abstract / Full Paper
Daisuke Tsuru
  1. Droplet Collision Modelling between Merging Immiscible Sprays in Direct Water Injection System
    Abstract / Full Paper
Nora Anne Urbanetz
  1. Tailoring particle morphology of spray-dried mannitol carrier particles by variation of drying outlet temperature
    Abstract / Full Paper
Bianca Maria Vaglieco
  1. Bio- and Mineral-Fuel Spray Evolution in Non-Evaporating and Evaporating Conditions by Image Processing Techniques
    Abstract / Full Paper
Ariane Vallet
  1. Pressure-Swirl Atomization Modelling using the Eulerian Approach
    Abstract / Full Paper
Moises Vera-Hernández
  1. Influence of cavitation on atomisation at low pressures using up-scaled and transparent nozzles
    Abstract / Full Paper
Hubert Verdier
  1. Measurements of fuel distribution and flame structure in kerosene-fuelled combustors using planar laser-induced fluorescence and OH* emissions
    Abstract / Full Paper
Antoine Viel
  1. Coupling 1D System AMESim and 3D CFD EOLE models for Diesel Injection Simulation
    Abstract / Full Paper
Philippe Villedieu
  1. Numerical and experimental study of aircraft engine ignition
    Abstract / Full Paper
Anne Virden
  1. Effects of viscosity, pump mechanism and nozzle geomerty on nasal spray droplet size
    Abstract / Full Paper
Stefan Vogel
  1. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
Thomas Vogel
  1. Influence of fuel mixture on spray formation in diesel processes
    Abstract / Full Paper
H. Wachtel
  1. Multi-Jet Spray Generation for Small Droplet Production
    Abstract
Georg Wachtmeister
  1. Injection Spray Comparison of Diesel Fuel and Cold Pressed Rape Seed Oil Fuel
    Abstract / Full Paper
Alain Walbott
  1. Coupling 1D System AMESim and 3D CFD EOLE models for Diesel Injection Simulation
    Abstract / Full Paper
Peter Walzel
  1. Tailoring particle morphology of spray-dried mannitol carrier particles by variation of drying outlet temperature
    Abstract / Full Paper
  2. Experimental Examination of the Liquid Sheet Disintegration Process Using Combined Photography and Fiber Based Measuring Techniques
    Abstract / Full Paper
  3. Measured Velocities and Pressure Profile inside a Twin-Fluid Atomizer
    Abstract / Full Paper
  4. Measurement of the droplet size distribution of a full cone nozzle
    Abstract / Full Paper
  5. Breakup of stretched liquid threads at low gas relative velocities – Comparison of the laminar rotary atomization to the gravity condition
    Abstract / Full Paper
Jin Wang
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
M. Weber
  1. Multi-Jet Spray Generation for Small Droplet Production
    Abstract
Miroslaw Weclas
  1. Combustion of Diesel sprays under real-engine like conditions: analysis of low- and high-temperature oxidation processes
    Abstract / Full Paper
  2. "Distribution-nozzle" concept: a method for Diesel spray distribution in space for charge homogenization by late injection strategy
    Abstract / Full Paper
Frank Weichert
  1. Experimental Examination of the Liquid Sheet Disintegration Process Using Combined Photography and Fiber Based Measuring Techniques
    Abstract / Full Paper
Christina Weickgenannt
  1. Drop impact close to a pore: experimental and numerical investigations
    Abstract / Full Paper
Bernhard Weigand
  1. Droplet Bouncing on Cold Wall: Comparison of Experiments with Direct Numerical Simulations
    Abstract / Full Paper
German Weisser
  1. Reference Data Generation of Spray Characteristics in Relation to Large 2-Stroke Marine Diesel Engines Using a Novel Spray Combustion Chamber Concept
    Abstract / Full Paper
Rikard Wellander
  1. Accounting for multiple scattering, signal attenuation and laser laser extinction using Structured Laser Illumination Planar Imaging
    Abstract / Full Paper
Michael Wensing
  1. Effect of fuel properties on primary breakup and spray formation studied on a gasoline 3-hole nozzle
    Abstract / Full Paper
  2. How biodiesel/diesel fuel blends affect spray breakup and emissions
    Abstract / Full Paper
  3. Influence of fuel mixture on spray formation in diesel processes
    Abstract / Full Paper
  4. Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect
    Abstract
Klaus Wenzlawski
  1. RANS and SAS analysis of GDI nozzle flow dynamics
    Abstract / Full Paper
Graham Wigley
  1. The Effect of Swirl on Air/Fuel Mixing in a 4 Valve GDI Engine
    Abstract / Full Paper
  2. Experimental investigation on the spray behaviour for a hollow cone piezo injector with a multiple injection strategy
    Abstract / Full Paper
  3. A Comparison between One and Two Component Velocity and Size Measurements in a Dense Spray
    Abstract / Full Paper
  4. Multihole gasoline direct injection spray plumes
    Abstract / Full Paper
Christian Willert
  1. High Speed Shadowgraphy of a Combusting Air Blast Atomizer Spray at Elevated Pressure
    Abstract / Full Paper
Geralt Williams
  1. Effects of viscosity, pump mechanism and nozzle geomerty on nasal spray droplet size
    Abstract / Full Paper
Michael Willmann
  1. How biodiesel/diesel fuel blends affect spray breakup and emissions
    Abstract / Full Paper
Erich J. Windhab
  1. Prilling process: an alternative for atomization and producing solid particles of emulsions
    Abstract / Full Paper
  2. Filament breakup of fat-based food emulsions during spraying
    Abstract
Karl-Ernst Wirth
  1. Discharge characteristics of the atomization of superheated liquids
    Abstract / Full Paper
Krzysztof Wislocki
  1. Analysis of the fuel distribution in the fuel spray axis
    Abstract
  2. The Qualitative Spray Characteristics of High-Pressure Gasoline Injection System
    Abstract / Full Paper
Johann A. Wloka
  1. Injection Spray Comparison of Diesel Fuel and Cold Pressed Rape Seed Oil Fuel
    Abstract / Full Paper
Xingbin Xie
  1. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
Tetsuya Yano
  1. Spatial Droplets Size Distribution in a Diesel Spray Taken by Photography with Super High Resolution
    Abstract / Full Paper
Kensuke Yokoi
  1. Numerical Studies of Multiple Droplet Impacts onto a Flat Substrate
    Abstract / Full Paper
Belal Al Zaitone
  1. Chaotic disintegration of suspension spray by a cross air flow
    Abstract / Full Paper
Claudio Zanzi
  1. Experimental study on the splash/deposition limit in drop impact onto solid surfaces
    Abstract / Full Paper
Lars Zigan
  1. Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect
    Abstract
  2. Effect of fuel properties on primary breakup and spray formation studied on a gasoline 3-hole nozzle
    Abstract / Full Paper