Sessions List

Plenary Lectures Application Automotive 1 Automotive 2
Automotive 3 Computational Methods in Sprays Drop Deformation and Break-Up 1 Drop Deformation and Break-Up 2
Drop Evaporation and Condensation Drop-Wall Interaction 1 Drop-Wall Interaction 2 Drop-Wall Interaction 3
Drop-Wall Interaction 4 Drop-Wall Interaction 5 Flow Modelling Fundamentals 1
Fundamentals 2 Fundamentals 3 Measurement Techniques 1 Measurement Techniques 2
Mini-Symposium on Advanced Optical Measurement Techniques 1 Mini-Symposium on Advanced Optical Measurement Techniques 2 Ongoing Reseach Poster Session Poster Session
Powder Production in Spray Processes 1 Powder Production in Spray Processes 2 Spray Combustion Spray Characterisation 1
Spray Characterisation 2 Spray Characterisation 3 Spray Modeling 1 Spray Modeling 2
Spray Modeling 3 Twin-Fluid Atomization

Plenary Lectures

Chaired by Oskar Haidn184, Cameron Tropea118, Eva Gutheil20

  1. The Arthur Lefebvre Award Lecture

    Multi-Jet Spray Generation for Small Droplet Production
    Abstract
    Franz Durst, M. Weber, H. Wachtel
  2. Spray Characterization: A Critical Review
    Abstract
    William D. Bachalo
  3. Fragmentation under scaling symmetry and stochastic modeling of a highly turbulent flow with spray
    Abstract
    Mikhael Gorokhovski

Application

Chaired by Miroslaw Weclas, Johannes Fritzer

  1. Novel External Atomizing Nozzle for Domestic Household Aerosols
    Abstract / Full Paper
    Rajab Sharief, Gary Eales
  2. EHD sprays as a seeding agens for PIV system measurements
    Abstract / Full Paper
    Darina Jašíková, Michal Kotek, Radek Horálek, Jiří Horčička, Václav Kopecký
  3. Effect of bell geometry in high-speed rotary bell atomization
    Abstract / Full Paper
    Joachim Domnick
  4. Experimental study on charging behavior of bio-fuels sprays generated by an annular electrostatic atomizer
    Abstract
    Radu Beleca, Wamadeva Balachandran

Automotive 1

Chaired by Soo Young No, Alessandro Montanaro

  1. Combustion of Diesel sprays under real-engine like conditions: analysis of low- and high-temperature oxidation processes
    Abstract / Full Paper
    Miroslaw Weclas, Jochen Cypris, T.M.A. Maksoud
  2. Injection Spray Comparison of Diesel Fuel and Cold Pressed Rape Seed Oil Fuel
    Abstract / Full Paper
    Johann A. Wloka, Andreas Hubert, Georg Wachtmeister
  3. The Effect of Swirl on Air/Fuel Mixing in a 4 Valve GDI Engine
    Abstract / Full Paper
    Graham Pitcher, Graham Wigley, Phil Stansfield, Rishin Patel
  4. Influence of fuel mixture on spray formation in diesel processes
    Abstract / Full Paper
    Thomas Vogel, Michael Lutz, Michael Wensing, Alfred Leipertz
  5. Mixture Formation and Combustion of Biodiesel Blended Fuels in a DI Diesel Engine
    Abstract / Full Paper
    Christian Hüttl, Ulrich Leidenberger, Dieter Brüggemann

Automotive 2

Chaired by Eran Sher, Peter Kay

  1. Spray Characteristics in CI engines Fuelled with Vegetable Oils and Its Derivatives-A Review
    Abstract / Full Paper
    Soo-Young No
  2. CFD study of needle motion influence on the spray conditions of single-hole injectors
    Abstract / Full Paper
    Xandra Margot, Sergio Hoyas, Pablo Fajardo, Stavroula Patouna
  3. Experimental investigation on the spray behaviour for a hollow cone piezo injector with a multiple injection strategy
    Abstract / Full Paper
    Andreas Schmid, Konstantinos Boulouchos, Bruno Schneider, Mehdi Mojtabi, Graham Wigley
  4. The Qualitative Spray Characteristics of High-Pressure Gasoline Injection System
    Abstract / Full Paper
    Ireneusz Pielecha, Krzysztof Wislocki, Jakub Czajka, Dmytro Maslennikov

Automotive 3

Chaired by Graham Pitcher, Wamadeva Balachandran

  1. The Influence of Fuel Properties on Spray Propagation, Atomization and Evaporation
    Abstract / Full Paper
    Manuel Reddemann, Florian Mathieu, D. Martin, Reinhold Kneer
  2. Characterisation of a Bio-Ethanol Direct Injection Spray Under Sub-Zero Conditions
    Abstract / Full Paper
    Ifan Evans, Phil J. Bowen, Peter J. Kay, J. King, G. Knight, L. Schmidt
  3. A Comparison between One and Two Component Velocity and Size Measurements in a Dense Spray
    Abstract / Full Paper
    Mehdi Mojtabi, Graham Wigley, Jan Jedelský, Jérome Helie
  4. Investigation of Cyclic Variations Effects on Mixing and Combustion Processes in a DISI IC-Engine by Using Large Eddy Simulation
    Abstract / Full Paper
    Dmitry Goryntsev, Amsini Sadiki, Johannes Janicka
  5. Bio- and Mineral-Fuel Spray Evolution in Non-Evaporating and Evaporating Conditions by Image Processing Techniques
    Abstract / Full Paper
    Luigi Allocca, Ezio Mancaruso, Alessandro Montanaro, Luigi Sequino, Bianca Maria Vaglieco

Computational Methods in Sprays

Chaired by Norbert Roth, Frank-Oliver Bartz

  1. Prediction of Spray Penetration for DI Engines by means of a New Application Tool
    Abstract / Full Paper
    Kai-Uwe Münch
  2. Coupling 1D System AMESim and 3D CFD EOLE models for Diesel Injection Simulation
    Abstract / Full Paper
    Richard Marcer, Charles Audiffren, Antoine Viel, Benoit Bouvier, Alain Walbott, Bruno Argueyrolles
  3. Surface Tension Model for High Viscosity Ratios Implemented in VOF Model
    Abstract / Full Paper
    Jan Boháček
  4. Effect of Confinement on Heat Transfer Between Gas-Droplets Round Impinging Jet and Flat Plate
    Abstract / Full Paper
    Maxim A. Pakhomov, Viktor I. Terekhov
  5. RANS and SAS analysis of GDI nozzle flow dynamics
    Abstract / Full Paper
    Junmei Shi, Klaus Wenzlawski, Jérome Helie, Hans Nuglisch, Jean Cousin

Drop Deformation and Break-Up 1

Chaired by Sergei Sazhin, Axel Mescher

  1. Experimental investigation of a Single Droplet Interaction with Shear Driven Film
    Abstract / Full Paper
    Samah Alghoul, Carol Easwick, David Hann
  2. Spatial Droplets Size Distribution in a Diesel Spray Taken by Photography with Super High Resolution
    Abstract / Full Paper
    H. Gen Fujimoto, Hirokazu Adachi, Tetsuya Yano, Tsukasa Hori, Jiro Senda, N. Marubayashi
  3. High-speed video observation and phase Doppler anemometry measurements of oil break-up in a model engine crankcase
    Abstract / Full Paper
    Steven Begg, Guillaume de Sercey, Morgan Heikal
  4. Particle Sizing and Flow Measurements in an Atomizing Mist Jet Nozzle: A Shadowgraphy Approach
    Abstract / Full Paper
    Oisín Fergal Peter Lyons, Tim Persoons, Darina B. Murray

Drop Deformation and Break-Up 2

Chaired by Roland Schmehl, Daniel Guildenbecher

  1. Breakup of stretched liquid threads at low gas relative velocities – Comparison of the laminar rotary atomization to the gravity condition
    Abstract / Full Paper
    Axel Mescher, Peter Walzel
  2. Experimental study of electrical primary break-up of thin sheets of dielectric liquid controlled by ElectroHydroDynamic actuator
    Abstract / Full Paper
    Christophe Louste, Michel Daaboul, Philippe Traore, Hubert Romat
  3. Criteria for breakup of droplets
    Abstract
    Ilai Sher, Eran Sher

Drop Evaporation and Condensation

Chaired by Ilia Roisman, Sawitree Saengkaew

  1. An analytical solution to the spherically symmetric species diffusion equation: application to modelling of heating and evaporation of bi-component droplets
    Abstract / Full Paper
    Sergei Sazhin, Pavel Krutitskii, Ahmed Elwardany, Guillaume Castanet, Fabrice Lemoine, Morgan Heikal
  2. New Correlations for Leidenfrost and Nukiyama Temperatures with Gas Pressure - Application to Liquid Film Boiling Simulation
    Abstract / Full Paper
    Chawki Habchi
  3. Experimental and numerical investigation of evaporating mono-component droplets in a turbulent channel flow
    Abstract / Full Paper
    Virginel Bodoc, Olivier Rouzaud, Florian Moreau, Rudy Bazile, Gerard Lavergne
  4. Simple Model for Turbulence Effects on the Vaporization of Liquid Single Droplets in Forced Convective Conditions
    Abstract / Full Paper
    Maher Abou Al-Sood
  5. Effect of Fuel-Evaporation Zone Length on Spray Combustion in a Gas Turbine Combustion Chamber
    Abstract / Full Paper
    Wahidullah Ahmadi, M. Chrigui, Amsini Sadiki, Johannes Janicka

Drop-Wall Interaction 1

Chaired by Marco Marengo, Nicolas Rimbert

  1. Impingement of Single Droplets on a Dry Smooth Surface at high Weber Numbers
    Abstract / Full Paper
    Benjamin Brinkmann, Thorsten Möller
  2. Experimental Investigation of Splashing Behaviour on Dry Solid Surfaces under High Parameters
    Abstract / Full Paper
    Sebastian Frohwein, Tjark Eisfeld, Franz Joos
  3. The anti-rebound effect of flexible polymers on impacting drops
    Abstract / Full Paper
    Michael Smith, Volfango Bertola
  4. Newtonian Airless Liquid Jet Interaction with a High Speed Moving Surface
    Abstract / Full Paper
    Bavand Keshavarz, Sheldon I. Green, Martin H. Davy, Donald T. Eadie
  5. Statistical analysis of water drop impact on surfaces with variable wettability
    Abstract / Full Paper
    Carlo Antonini, Alidad Amirfazli, Marco Marengo

Drop-Wall Interaction 2

Chaired by Ana Moita, Phil Threlfall-Holmes

  1. Droplet Bouncing on Cold Wall: Comparison of Experiments with Direct Numerical Simulations
    Abstract / Full Paper
    Norbert Roth, Hassan Gomaa, Nils Bordoni, Thibaut Dumont, Bernhard Weigand
  2. Characterization of Wall Film Formation from Impinging Diesel Fuel Sprays using LIF
    Abstract / Full Paper
    Alf Magnusson, Mauro Begliatti, Francisco Borja Hervás, Mats Andersson
  3. Experimental investigation of droplet collisions with higher viscosity
    Abstract / Full Paper
    Matthias Kuschel, Martin Sommerfeld
  4. Experimental study on the splash/deposition limit in drop impact onto solid surfaces
    Abstract / Full Paper
    Julián Palacios, Pablo Gómez, Claudio Zanzi, Joaquín López, Julio Hernández

Drop-Wall Interaction 3

Chaired by Kai-Uwe Münch, Maksim Pakhomov

  1. Single drop impact onto a deep pool: experimental observations and theoretical model for the crater evolution
    Abstract / Full Paper
    Alfio Bisighini, Gianpietro Elvio Cossali, Cameron Tropea, Ilia Roisman
  2. Physical analysis of multimodality in atomization processes
    Abstract / Full Paper
    Miguel R. Oliveira Panão, António Moreira, Lucian Radu
  3. Numerical Studies of Multiple Droplet Impacts onto a Flat Substrate
    Abstract / Full Paper
    Kensuke Yokoi, Peter J. Kay, Phil J. Bowen, Tim Phillips

Drop-Wall Interaction 4

Chaired by Miguel Panão, Carlo Antonini

  1. The effect of co-current gas velocity on heat transfer of the pulse spray
    Abstract / Full Paper
    Alexandr Nazarov, Anatoly Serov, Viktor I. Terekhov, Konstantin Sharov
  2. Dynamic behaviour of liquid droplets bouncing onto a hot slab
    Abstract / Full Paper
    Franck Lelong, Michel Gradeck, Nathalie Seiler, Pierre Ruyer, Guillaume Castanet, Pierre Dunand
  3. Heat transfer mechanisms at drop/wall interactions: experiments and theory
    Abstract / Full Paper
    Ana Moita, Ilia Roisman, António Moreira
  4. Assessment of heat transfer measurements at droplet/wall interactions: relation with the impact conditions
    Abstract / Full Paper
    Ana Moita, António Moreira
  5. Two phase spray cooling for specific local quenching of workpieces in flexible flow fields
    Abstract / Full Paper
    Sven Schuettenberg, Martin Hunkel, Udo Fritsching

Drop-Wall Interaction 5

Chaired by Alf Magnusson, Rainer Koch

  1. "Distribution-nozzle" concept: a method for Diesel spray distribution in space for charge homogenization by late injection strategy
    Abstract / Full Paper
    Miroslaw Weclas, Jochen Cypris
  2. On the Splashing Threshold of a Single Droplet Impacting onto Rough and Porous Surfaces
    Abstract / Full Paper
    Andre Gipperich, Andreas Lembach, Ilia Roisman, Cameron Tropea
  3. Drop impact close to a pore: experimental and numerical investigations
    Abstract / Full Paper
    Steffen Goertz, Christina Weickgenannt, Andreas Lembach, Ilia Roisman, Cameron Tropea

Flow Modelling

Chaired by Jean Cousin, Moti Levy

  1. Experimental and Numerical Investigation about internal Cavitating Flow and Primary Atomization of a Large-Scaled VCO Diesel Injector with Eccentric Needle
    Abstract / Full Paper
    Tetsuya Oda, Motoki Hiratsuka, Yukihiro Goda, Satoshi Kanaike, Katsuyuki Ohsawa
  2. Numerical investigation of fuel property effect on cavitating flow in generic fuel injection nozzle geometries
    Abstract / Full Paper
    Junmei Shi, Mohammad Arafin
  3. Multihole gasoline direct injection spray plumes
    Abstract / Full Paper
    Rossella Rotondi, Jérome Helie, Cedric Leger, Mehdi Mojtabi, Graham Wigley
  4. Wavelet analysis of an unsteady air-blasted liquid sheet
    Abstract / Full Paper
    Esteban Calvo, Orietta Nicolis, Antonio Lozano, Marco Marengo

Fundamentals 1

Chaired by Antonio Lozano, Russel Lockett

  1. Effect of fuel properties on primary breakup and spray formation studied on a gasoline 3-hole nozzle
    Abstract / Full Paper
    Lars Zigan, Ingo Schmitz, Michael Wensing, Alfred Leipertz
  2. An experimental investigation of discharge coefficient and cavitation length in the elliptical nozzles
    Abstract / Full Paper
    Sung-Ryoul Kim, Kun-Woo Ku, Jung-Goo Hong, Choong-Won Lee
  3. Size and velocity distributions of droplets in an air-water horizontal pipe flow
    Abstract / Full Paper
    Sylvain Boulesteix, Patricia Ern, Francois Charru, F. Luck
  4. Ballistic Imaging in the Near-Field of an Effervescent Spray
    Abstract / Full Paper
    Mark Linne, David Sedarsky, Terrence Meyer, James Gord, Campbell Carter
  5. Several aspects of the atomization behavior of various Newtonian fluids with a like-on-like impinging jet injector
    Abstract / Full Paper
    Giovanni Bailardi, Michele Negri, Helmut Ciezki

Fundamentals 2

Chaired by Chawki Habchi, Patricia Ern

  1. Mode Transitions in an Oscillating Liquid Sheet
    Abstract / Full Paper
    Antonio Lozano, Esteban Calvo, Juan Antonio García, Felix Barreras
  2. Pre-filming primary atomization: Experiments and modeling
    Abstract / Full Paper
    Sebastian Gepperth, Daniel Guildenbecher, Rainer Koch, Hans-Jörg Bauer
  3. An Experimental Investigation of Surfactant-Laden non-Newtonian Jet Breakup
    Abstract / Full Paper
    Alexis Dechelette, Osvaldo Campanella, Carlos Corvalan, Paul Sojka
  4. Influence of cavitation on atomisation at low pressures using up-scaled and transparent nozzles
    Abstract / Full Paper
    Raúl Ochoterena, Peng Li, Moises Vera-Hernández, Sven Andersson

Fundamentals 3

Chaired by Mário Costa, Devendra Deshmukh

  1. Modelling of spray injection from water mist fire suppression systems
    Abstract / Full Paper
    Simona Tonini, Andreas Theodorakakos, Manolis Gavaises, Gianpietro Elvio Cossali
  2. The Stable distribution as a physically meaningful description of the size distribution from Rayleigh resonance jet break up type atomisers
    Abstract / Full Paper
    Phil Threlfall-Holmes
  3. Evidences of turbulent cascading atomization in the bag-breakup regime
    Abstract / Full Paper
    Nicolas Rimbert, Guillaume Castanet

Measurement Techniques 1

Chaired by Tatsuya Kawaguchi, Darina Jašíková

  1. Measurement of droplets temperature in a flame by using a global rainbow technique with a pulse laser
    Abstract / Full Paper
    Sawitree Saengkaew, Damien Bonin, Gerard Grehan
  2. Numerical investigation of discriminated forward scattering: optimizing imaging optics for dense sprays
    Abstract / Full Paper
    David Sedarsky, Edouard Berrocal, Mark Linne
  3. Experimental Investigation of Droplet-Droplet Interactions
    Abstract / Full Paper
    Róbert Bordás, Thomas Hagemeier, Dominique Thévenin

Measurement Techniques 2

Chaired by Graham Wigley, Oisín Fergal Peter Lyons

  1. Velocity measurements of bubbles in liquid nitrogen
    Abstract / Full Paper
    Nicolas Fdida, Béatrice Patte, Jean-Bernard Blaisot, Eric Rouland, Valérie Bégin
  2. Table-top flash X-ray diagnostics of dodecane sprays
    Abstract / Full Paper
    Eric Robert, Sébastien Dozias, Christophe Cachoncinlle, Jean Michel Pouvesle
  3. Experimental Examination of the Liquid Sheet Disintegration Process Using Combined Photography and Fiber Based Measuring Techniques
    Abstract / Full Paper
    Emir Musemic, Marcel Gaspar, Frank Weichert, Heinrich Müller, Peter Walzel
  4. Experimental characterization of isothermal and evaporative sprays
    Abstract / Full Paper
    Yannis Hardalupas, Srikrishna Sahu, Alexander M.K.P. Taylor
  5. Concept for a versatile spray test rig for comparison of evaporation between kerosene and replacement fuels for aviation
    Abstract / Full Paper
    Johannes Fritzer, Fabrice Giuliani, Thomas Leitgeb, Andreas Lang

Mini-Symposium on Advanced Optical Measurement Techniques 1

Chaired by William D. Bachalo, Christian Willert

  1. Influence of Surface Roughness in Spray/Wall interaction Phenomena
    Abstract / Full Paper
    Davood Kalantari, Cameron Tropea
  2. Spatio-temporal analysis of a liquid jet using a sub-picosecond optical gate
    Abstract / Full Paper
    Said Idlahcen, Claude Rozé, Jean-Bernard Blaisot, Loïc Méès, Thierry Girasole
  3. Analysis of the fluorescence signal from a single droplet using a model based on the Lorenz Mie Theory and on ray tracing methods
    Abstract / Full Paper
    Bruno Frackowiak, Cameron Tropea
  4. Accounting for multiple scattering, signal attenuation and laser laser extinction using Structured Laser Illumination Planar Imaging
    Abstract / Full Paper
    Edouard Berrocal, Rikard Wellander, Elias Kristensson
  5. Measurement of bi-component droplet vaporization using Global Rainbow Refractometry
    Abstract
    Virginel Bodoc, Olivier Rouzaud, Gerard Lavergne

Mini-Symposium on Advanced Optical Measurement Techniques 2

Chaired by Mark Linne, Edouard Berrocal

  1. Optic and electric methods and test procedures for the pulse spray parameters
    Abstract / Full Paper
    Alexandr Nazarov, Anatoly Serov, Michael Bodrov, Valery Simakov
  2. Measurement of continuous liquid jet length in atomizers with optical connectivity, electrical conductivity and high-speed photography techniques
    Abstract / Full Paper
    Georgios Charalampous, Constantinos Hadjiyiannis, Yannis Hardalupas, Alexander M.K.P. Taylor
  3. Dynamic ILIDS measurement by means of high-speed Nd:YLF laser
    Abstract / Full Paper
    Tatsuya Kawaguchi, Isao Satoh, Takushi Saito
  4. High Speed Shadowgraphy of a Combusting Air Blast Atomizer Spray at Elevated Pressure
    Abstract / Full Paper
    Christian Willert, Steffen Mößner, Stefan Freitag, Christoph Hassa

Ongoing Reseach Poster Session

  1. Modeling and Simulation of Evaporating Water/Nitrogen Spray Using Direct Quadrature Method of Moments
    Abstract
    Srikanth Reddy Gopireddy, Rana Muhammed Humza, Eva Gutheil
  2. Analysis of the fuel distribution in the fuel spray axis
    Abstract
    Ireneusz Pielecha, Krzysztof Wislocki, Jakub Czajka, Dmytro Maslennikov
  3. Visualization of the Flow in a New Injection Burner
    Abstract
    Felix Barreras, A. González-Espinosa, Antonio Lozano, Juan Antonio García, Esteban Calvo
  4. Preliminary Study on the Granulation of the Molten Slag
    Abstract
    Sung Uk Ryu, Heung Soo Park
  5. Dynamic Analysis of Two Rotating-Particles Collision Process by Molecular Dynamics Method
    Abstract
    Yuji Takizawa, Tsuyoshi Okamoto
  6. Dynamic Analysis of Particle - Moving Solid Surface Interaction by Molecular Dynamics Method
    Abstract
    Yuki Omori, Tsuyoshi Okamoto
  7. Application of Laser-Induced Exciplex Fluorescence with Alternative Diesel Fuels
    Abstract
    Ulrich Leidenberger, Christian Hüttl, S. Haugg, Dieter Brüggemann
  8. Development of a Multi-Component Evaporation Model for Heavy Fuel Oil for Marine Engine Applications
    Abstract
    Nikolaos Stamoudis, Christos Chryssakis, Lambros Kaiktsis
  9. Filament breakup of fat-based food emulsions during spraying
    Abstract
    Bipro Nath Dubey, M.R. Duxenneuner, Erich J. Windhab
  10. Semi-Empirical Model to Calculate Spray Length Considering Evaporation Effect
    Abstract
    Alexandre Dias Flügel, Lars Zigan, Ingo Schmitz, Michael Wensing, Alfred Leipertz
  11. Near-nozzle laminar-to-turbulence flow transition in diesel sprays visualized by ultrafast x-ray phase contrast imaging
    Abstract
    Jin Wang, Zunping Liu, Kamel Fezzaa, Seoksu Moon, Jian Gao, Kyoung‐su Im, Xingbin Xie and Ming‐Chia Lai

Poster Session

  1. A Numerical Analysis for the Spray Characteristics of Liquefied n-butane Fuel
    Abstract
    Ji-Hun Kim, Doo-Sung Baik, Seang-Wock Lee, Yong-Seok Cho
  2. High Pressure Overlapping Flat Sprays Nozzles
    Abstract / Full Paper
    Mohamed Ali El Kamkhi, Ghasem Nasr, Martin Burby, Amir Nourian
  3. Measurements of fuel distribution and flame structure in kerosene-fuelled combustors using planar laser-induced fluorescence and OH* emissions
    Abstract / Full Paper
    Mikael Orain, Frederic Grisch, Hubert Verdier
  4. Stability of plane Couette suspension flow with nonuniform particle concentration profile
    Abstract / Full Paper
    Sergei Boronin, Alexander Osiptsov
  5. Effects of viscosity, pump mechanism and nozzle geomerty on nasal spray droplet size
    Abstract / Full Paper
    Paul Kippax, Julie Suman, Anne Virden, Geralt Williams
  6. Stability and breakup of transient jets
    Abstract
    Ilai Sher
  7. Correlations between the Two-Phase Gas/Liquid Spray Break-up Mechanism and the Dimensionless Numbers
    Abstract / Full Paper
    Mohammad Rahman, Ted Heidrick, Brian Fleck
  8. Novel Modifications of Twin-fluid Atomizers: Performance, Advantages and Drawbacks
    Abstract / Full Paper
    Jan Jedelský, Miroslav Jícha

Powder Production in Spray Processes 1

Chaired by Udo Fritsching, Joachim Domnick

  1. Heat and Mass Transfer accompanied by Crystallisation of single Particles containing Urea-water-solution
    Abstract / Full Paper
    Siniša Kontin, Andreas Höfler, Rainer Koch, Hans-Jörg Bauer
  2. Drying Behavior of High Load Multiphase Droplets at High Temperature Conditions in an Acoustic Levitator
    Abstract / Full Paper
    Rosa Mondrágon, Leonor Hernández, Jose Enrique Juliá, Sergio Chiva, Juan Carlos Jarque, Vicent Cantavella
  3. Tailoring particle morphology of spray-dried mannitol carrier particles by variation of drying outlet temperature
    Abstract / Full Paper
    Eva Maria Littringer, Axel Mescher, Peter Walzel, Nora Anne Urbanetz
  4. Process design of ultrasonic spray pyrolysis synthesis of Ru/TiO2 nanoparticles
    Abstract / Full Paper
    Srecko Stopic, Michael Schroeder, Andre Hellmann, Bernd Friedrich
  5. Chaotic disintegration of suspension spray by a cross air flow
    Abstract / Full Paper
    Belal Al Zaitone, Vuong Doan, Ilia Roisman, Cameron Tropea

Powder Production in Spray Processes 2

Chaired by Peter Walzel, Srecko Stopic

  1. Prilling process: an alternative for atomization and producing solid particles of emulsions
    Abstract / Full Paper
    Bipro Nath Dubey, M.R. Duxenneuner, Erich J. Windhab
  2. The trajectory and break-up of a particle laden liquid jet in the centrifugal field
    Abstract / Full Paper
    Simon Gramlich, Manfred Piesche
  3. Modeling of drop sizes from effervescent atomization of gelatinized starch suspensions
    Abstract / Full Paper
    Jewe Schröder, Marc Schlender, Paul Sojka, Volker Gaukel, Heike P. Schuchmann
  4. Analysis of time-dependend spray structures in spray processes in enclosures with square cross sections
    Abstract / Full Paper
    Aljoscha Lampa, Udo Fritsching

Spray Combustion

Chaired by Raffaele Ragucci, Jochen Cypris

  1. Measurement of Initial Conditions of a Kerosene Spray from a Generic Aeroengine Injector at Elevated Pressure
    Abstract / Full Paper
    Stefan Freitag, Ulrich Meier, Johannes Heinze, Thomas Behrendt, Christoph Hassa
  2. Reference Data Generation of Spray Characteristics in Relation to Large 2-Stroke Marine Diesel Engines Using a Novel Spray Combustion Chamber Concept
    Abstract / Full Paper
    Kai Herrmann, German Weisser, Reiner Schulz, Beat von Rotz, Konstantinos Boulouchos, Bruno Schneider
  3. Numerical and experimental study of aircraft engine ignition
    Abstract / Full Paper
    Guillaume Linassier, Renaud Lecourt, Philippe Villedieu, Gerard Lavergne
  4. Fuel distribution measurements in a model low NOx double annular combustor using Laser Induced Fluorescence
    Abstract / Full Paper
    Russel Lockett, Douglas Greenhalgh

Spray Characterisation 1

Chaired by Yannis Hardalupas, Mehdi Mojtabi

  1. Improvement of Atomization Characteristics of Spray by Multi Hole Nozzle for Pressure Atomized Type Injector
    Abstract / Full Paper
    Nobushige Tamaki, Atsushi Kato, Keita Imano, Kosuke Kato
  2. Measurement of the droplet size distribution of a full cone nozzle
    Abstract / Full Paper
    Boris Terje Kohnen, Emir Musemic, Florian Straßburger, Benjamin Küpper, Peter Walzel
  3. Effect of the Liquid Injection Angle on the Atomization of Liquid Jets in Subsonic Crossflows
    Abstract / Full Paper
    Hugo Almeida, João Sousa, Mário Costa
  4. How biodiesel/diesel fuel blends affect spray breakup and emissions
    Abstract / Full Paper
    Ilona Gostic, Clemens Senghaas, Michael Willmann, Michael Wensing
  5. High Pressure Spray Characterization of Vegetable Oils
    Abstract / Full Paper
    Devendra Deshmukh, Avulapati Madan Mohan, T.N.C. Anand, R.V. Ravikrishna

Spray Characterisation 2

Chaired by Reinhold Kneer, Ali Bayat

  1. Discharge characteristics of the atomization of superheated liquids
    Abstract / Full Paper
    Astrid Günther, M. Rossmeissl, Karl-Ernst Wirth
  2. Characterization of a Horizontal Two-Phase Spray from an Effervescent Atomizer
    Abstract / Full Paper
    Johana Gomez, Brian Fleck, Jennifer McMillan, Jason Olfert
  3. Effervescent Spray Characterization of Jatropha Pure Plant Oil
    Abstract / Full Paper
    Avulapati Madan Mohan, Devendra Deshmukh, T.N.C. Anand, R.V. Ravikrishna
  4. Characterization of fuel oil atomizers in industrial operation
    Abstract / Full Paper
    Dorothée Chaillou, Vincent Alaterre, Xavier Paubel, Bertrand Leroux, Rémi Tsiava

Spray Characterisation 3

Chaired by Felix Barreras, Avulapati Madan Mohan

  1. Radial Analysis of Fine Sprays Using Phase Doppler Anemometry (PDA)
    Abstract / Full Paper
    Joseph Stewart, Ghasem Nasr, Martin Burby, Amir Nourian
  2. Experimental study on the pulsation of a liquid jet issued from a coaxial injector
    Abstract / Full Paper
    Minori Shirota, Koichi Kitami, Tetsuya Kon, Takao Inamura, Yoshio Nunome, Hiroshi Tamura
  3. Efficiency of different spray application methods in second crop maize
    Abstract / Full Paper
    Ali Bayat, Ali Bolat, Alper Soysal, Mustafa Güllü, Hikmet Sarihan

Spray Modeling 1

Chaired by Simona Tonini, Xinguang Cui

  1. Primary Breakup Model Considering Spray Core Development
    Abstract / Full Paper
    Fabian Fischer, Barbara Heine, Cameron Tropea
  2. An extension of dynamic droplet deformation models to secondary atomization
    Abstract / Full Paper
    Frank-Oliver Bartz, Roland Schmehl, Rainer Koch, Hans-Jörg Bauer
  3. Pressure-Swirl Atomization Modelling using the Eulerian Approach
    Abstract / Full Paper
    Abdelhak Belhadef, Ariane Vallet, Fabient Anselmet
  4. Investigation of the Opening Angle between Two Sprays in Diverging Nozzles
    Abstract / Full Paper
    Vivak Luckhchoura, Rahul Pardeshi, Maria Cárdenas, Stefan Vogel, Abhinav Sharma, Norbert Peters, Reinhold Kneer
  5. Study of the Influence of Initial Droplet Size Distribution on a Liquid Jet in Crossflow Model Performance
    Abstract
    Pasquale Di Martino, Giancarlo Sorrentino, Raffaele Ragucci

Spray Modeling 2

Chaired by Mikhael Gorokhovski, Junmei Shi

  1. Large Eddy Simulation of Flow-Field and Micro-Particle Deposition in an Idealized Mouth-Throat Constricted Tube
    Abstract / Full Paper
    Xinguang Cui, Eva Gutheil
  2. CFD analysis of non-evaporating sprays using the DQMOM method
    Abstract / Full Paper
    Allan Holm Nielsen, Bjørn Helge Hjertager, Tron Solberg
  3. Numerical Simulations of the Interactions between a Vortex and a Liquid Gas Interface
    Abstract / Full Paper
    Jean Cousin, Thibaut Menard, Alain Berlemont, Jérome Helie
  4. A numerical characterization of new high-pressure multi-hole GDI injector
    Abstract / Full Paper
    Simone Malaguti, Stefano Fontanesi, Giuseppe Cantore

Spray Modeling 3

Chaired by Simone Malaguti, Christos Chryssakis

  1. Effervescent atomization of extra-light fuel-oil: Experiment and statistical evaluation of spray characteristics
    Abstract / Full Paper
    Jakub Broukal, Jiří Hájek, Jan Jedelský
  2. Droplet Collision Modelling between Merging Immiscible Sprays in Direct Water Injection System
    Abstract / Full Paper
    Daisuke Tsuru, Hiroshi Tajima, Satoshi Kawauchi
  3. Evaluation of active control strategies regarding airblast atomisation: assessments under non-evaporating and non-reactive conditions
    Abstract / Full Paper
    Fabrice Giuliani, Christoph Hennig, Johannes Fritzer, Thomas Leitgeb

Twin-Fluid Atomization

Chaired by Brian Fleck, Ilai Sher

  1. Performance of an effervescent atomizer for geo-engineering purposes
    Abstract
    Ranjani Padmanabhan, Daniel Guildenbecher, Daniel Hirleman, Paul Sojka
  2. Effect of Flow Conditions on Spray Cone Angle of a Two-Fluid Atomizer
    Abstract / Full Paper
    Maziar Shafaee, Sayed Abdolhossein Banitabaei, Mehdi Ashjaee, Vahid Esfahanian
  3. Are Sprays an Answer to Global Warming?
    Abstract / Full Paper
    Daniel Guildenbecher, Daniel Hirleman, Paul Sojka
  4. Measured Velocities and Pressure Profile inside a Twin-Fluid Atomizer
    Abstract / Full Paper
    Britta Loskand, Peter Walzel
  5. Spray Formation from Homogeneous Flash-Boiling Liquid Jets
    Abstract / Full Paper
    Eran Sher, Moti Levi
  6. Effervescent Atomization of Diesel Fuel Containing Dissolved CO2
    Abstract / Full Paper
    Mohammad Karaen, Eran Sher